Sorts Events By Distance / Type; Use Traffic Information; Recalculate To Avoid Traffic - Mio MIOMAP digiwalker C320 Manual

4.9.2.5 Sorts events by distance / type

The list of traffic events can be ordered by their distance from the current position, or
by their type. Tap this button to toggle between the two possibilities.

4.9.2.6 Use traffic information

This button is enabled by default, which means that TMC messages are used in
route planning. Tap this button to have MioMap ignore real-time traffic information
when planning routes.
Tip: If you make a route planning for a future journey, it may be better to turn off
TMC corrected route planning.

4.9.2.7 Recalculate to avoid traffic

This setting is similar to the previous one. Disabling it will not prevent the system
from using TMC data for route planning, but will not trigger an automatic
recalculation when the traffic conditions change during your journey.
60