1. Manuals
  2. Brands
  3. Mio Manuals
  4. Car Navigation system
  5. DigiWalker C320
  6. Manual

Mio MIOMAP digiwalker C320 Manual

Navigation software for miomap v3.3 c320
Hide thumbs Also See for MIOMAP digiwalker C320:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Quick Manual
MioMap v3.3 C320
Navigation software for MioMap v3.3 C320
US English
July, 2007 (v1.00)

Advertisement

Table of Contents
loading

Related Manuals for Mio MIOMAP digiwalker C320

Summary of Contents for Mio MIOMAP digiwalker C320

  • Page 1 MioMap v3.3 C320 Navigation software for MioMap v3.3 C320 US English July, 2007 (v1.00)

  • Page 2: Copyright Note

    This manual nor any parts thereof may not be reproduced or transmitted in any form either electronically or mechanically, including photocopying and recording, without the express written consent of Mio Technology Limited. © 2007 Mio Technology Limited Whereis® map data is © 2007 Telstra Corporation Limited and its licensors Data Source ©...
  • Page 3 Thank you for choosing MioMap as your door-to-door in-car navigator. Read the Quick Start Guide first and start using MioMap right away. This document is the detailed description of the software. Although MioMap can easily be discovered by experience, it is still recommended that you read through this manual to clearly understand the exact function of each button and icon.

  • Page 4: Table Of Contents

    Table of Contents Warnings and safety information................. 9 General information................... 10 Operating MioMap (Controls) ................11 Hardware buttons..................11 3.1.1 Power on/off..................11 Screen buttons and controls ..............12 3.2.1 Direct selectors ................... 12 3.2.2 List selectors..................12 3.2.3 Sliders....................12 3.2.4 Switches .....................
  • Page 5 4.3.8 Map orientation and Overview (No. 10) ..........28 4.3.9 GPS position status (No. 11) .............. 29 4.3.10 Battery status (No. 12) ................ 30 4.3.11 Sound muting (No. 13)................ 30 4.3.12 Track Log recording/playback indicator (No. 14) ........ 30 4.3.13 Cursor menu (No.
  • Page 6 4.7.4 Main button ..................54 Road safety cameras (where available) ............. 54 4.8.1 Camera types ..................55 4.8.1.1 Fixed cameras ................55 4.8.1.2 Mobile cameras ................55 4.8.1.3 Built-in cameras ................55 4.8.1.4 Section control cameras .............. 56 4.8.1.5 Red light cameras................ 56 4.8.2 Controlled traffic direction ..............
  • Page 7 6.1.8.1 Automatic..................76 6.1.8.2 Ask First..................76 6.1.8.3 Disabled..................77 Sound settings ................... 77 6.2.1 Master sound volume/switch............... 77 6.2.2 Voice guidance volume/switch............78 6.2.3 Key sound volume/switch ..............78 6.2.4 Dynamic Volume................. 78 6.2.5 Attention Tone ..................78 Route parameter settings................79 6.3.1 Route ....................

  • Page 9: Warnings And Safety Information

    1 Warnings and safety information MioMap is a navigation system that helps you find your way to your selected destination. It will determine your exact location with the help of the built-in GPS receiver and antenna. The position information obtained from the GPS receiver will not be transmitted anywhere, so others will not be able to track you.

  • Page 10: General Information

    2 General information MioMap is a navigation system optimized for in-car use. It provides door-to-door navigation for both single and multi-point routes using adaptable route parameters. MioMap is capable of planning routes throughout the whole installed map set. Unlike some other products, MioMap does not require that you change maps or switch to a poorly detailed general map to navigate between map segments or countries.

  • Page 11: Operating Miomap (Controls)

    3 Operating MioMap (Controls) MioMap is designed for easy operation. All controls are operable by fingertips. Wherever possible, pushbuttons and lists are provided to make accessing functions or changing settings as easy as possible. 3.1 Hardware buttons There is only one hardware button on your MioMap v3.3. Please, refer to the provided Hardware User's Manual for more details.

  • Page 12: Screen Buttons And Controls

    3.2 Screen buttons and controls The primary input channel of MioMap is the touch screen. If you read on, you will realize that most parts of the screen are not only used to display information but also to initiate functions by tapping. Below you will find a list of the most frequently used controls in the program.

  • Page 13: Switches

    3.2.4 Switches When a function can only have two values (mainly Enabled and Disabled), a switch is used. Unlike with list selectors, the horizontal line contains the name of the function and not the actual status. There is a lamp on the left to show whether the function is active or not.

  • Page 14: Abc-Type Keyboards

    3.2.6.1 ABC-type keyboards These keyboards contain only letters (Latin, Hebraic, Greek or Cyrillic). If you wish to enter numbers, you need to tap the Keys button to switch to the numeric keyboard. Use Backspace (arrow pointing left) to delete the last letter you have entered if you have made a mistake, tap Space to enter more words, and hit List or Done to finish entering the text.

  • Page 15: The Numeric Keyboard

    The special keys described in the previous section are also available here. 3.2.6.3 The numeric keyboard The numeric keyboard only contains numbers, on huge buttons. The special keys you find on the other keyboards (except Space) are available here as well. Although QWERTY-type keyboards also contain number keys, when entering a house number, the program offers the more convenient numeric keypad.

  • Page 16: Discovering The Program Through The Screens

    4 Discovering the program through the screens The best way to discover MioMap is to explore each screen in detail, and to find out how to move from one to another. Read this chapter for a guided tour. 4.1 Main menu MioMap starts by displaying the Main menu.

  • Page 17: The Map

    Content Explanation Button to open History Page 68 Button to open Settings Page 72 Button to exit MioMap 4.2 The map The most important and most frequently used screen of MioMap is the screen with the map (Split screen). The elements of the map are described here. For the controls and special functions see Page 24.

  • Page 18: Zoom Levels

    4.2.2 Zoom levels MioMap uses high quality vector maps that let you see the map at various zoom levels, always with optimized content. Street names and other text objects are always displayed with the same font size, never upside down, and you only see as many streets and objects as needed to find your way around the map.

  • Page 19: Streets And Roads

    Note: The automatic day/night mode is based upon the current date and GPS position by which MioMap calculates the exact sunrise and sunset times on the particular day at the particular location. Using that information MioMap can automatically switch between the color schemes a few minutes before sunrise, when the sky has already turned bright, and a few minutes after sunset before it gets dark.

  • Page 20: Other Objects

    tilting up and down to see how MioMap switches between the two modes in an instant. Note: The automatic switching is on even when using Smart Zoom. At first you may find it odd, but later you will discover how it adjusts the displayed information to the current view of the map.

  • Page 21: Selected Map Point, Also Known As The Cursor

    road where you drive (e.g. on the right in the United States and on the left in the U.K.) on two-way roads. You always see this corrected position on the map. The position given by the GPS is not displayed, but this is the information recorded in the track log. When recorded track logs are shown on the map, the line is not corrected.
  • Page 22 These icons are large enough to recognize the symbol, and semi-transparent so as not to cover the streets and junctions behind them. When the map is zoomed out, the icons are not shown. As you zoom in, small dots appear at the locations of visible POIs. Zooming in further makes the full icons appear.

  • Page 23: Road Safety Cameras

    4.2.9 Road safety cameras Road safety cameras, such as speed cameras and red light cameras are special POI types in MioMap. They are described in detail here: Page 54. 4.2.10 Elements of the Active Route MioMap uses a multi-destination routing system in which more elements can be distinguished.

  • Page 24: Roads In The Route Excluded By Your Preferences

    The line of the route is displayed on the driving side of the road for two-way and on the axis in case of one-way streets. When the map is zoomed in and the line is wide enough, small arrows show the direction of the route. This can be useful if you preview the route before starting the journey or when entering a complex junction.
  • Page 25 Display Control Turn preview*** Opens Route menu Zooms in (optional) Zooms out (optional) Tilts down (optional) Tilts up (optional) Indicates that Follow to GPS Re-enables Lock-to-Position / Smart Zoom position and heading is inactive Selected map point (Cursor) Opens Popup Info and Cursor menu Opens and closes Info Panel on the right Opens Menu (Find, Quick, Route, Main) Map orientation and Overview...

  • Page 26: Turn Preview (No. 1)

    *** Appears only when a route is active **** Appears only when a route is active and the next turn is near ***** Appears only if speed limit is known for the current road 4.3.1 Turn preview (No. 1) When the first (default) page of the Info Panel is shown, and there is an active route, this field shows a graphic illustration of the next maneuver.

  • Page 27: Tilt Up And Down (No. 4 & 5)

    4.3.3 Tilt up and down (No. 4 & 5) These semi-transparent buttons are only displayed if "Zoom & Tilt" is enabled in the Quick menu (Page 43). This function modifies the vertical viewing angle of the map in 3D mode. You can change the angle in a wide range starting from a top down view (2D view is seamlessly integrated) all the way to a flat view that lets you see far ahead.

  • Page 28: Cursor (No. 7)

    Note: When the Split screen is open, you do not need to tap the Follow button. Just wait for 30 seconds without tapping the screen, and MioMap will automatically re- enable Lock-to-Position and/or Smart Zoom. If you tap the screen during this period, the 30 seconds countdown will restart.

  • Page 29: Gps Position Status (No. 11)

    Tap this icon to switch to North-up mode. Now the map is fixed to keep facing North. The icon and map change to show the new rotation mode. Tap the icon again to enter Overview mode. This mode looks similar to the North-up mode with one difference: the zoom level in this mode has a fixed default to give you a better look of where you are on a 2D view map.

  • Page 30: Battery Status (No. 12)

    • When small car symbols are displayed under the dish, TMC information is available. 4.3.10 Battery status (No. 12) The status of the battery is also shown by MioMap. You can estimate the available power reserve from the length of the bar inside. Some examples: •...

  • Page 31: Cursor Menu (No. 15)

    During track log playback a green icon will blink. Tapping this icon (in fact, tapping the screen anywhere) stops the simulation. 4.3.13 Cursor menu (No. 15) The Cursor is the selected point on the map (marked by a red dot and radiating red circles around it), or the current GPS position when it is available and Lock-to- Position is enabled.
  • Page 32 first get some fuel at B’ or want to influence the direction of the route). This menu point works only if a route is already active. • Remove Via: removes the ‘via point’ near or at the Cursor. The route will be recalculated immediately excluding the deleted point.

  • Page 33: Current Street (No. 16)

    4.3.14 Current street (No. 16) This field of the Split screen shows the name or number (as available) of the current street or road you are driving on. 4.3.15 Travel and Route data (No. 17) The contents of this area are different when cruising (without an active route) or navigating (following an active route).

  • Page 34: Approaching Next Turn (No. 20)

    This field is only displayed when navigating a route. 4.3.18 Approaching next turn (No. 20) This proximity indicator bar is only visible when approaching the next route event. It appears on the screen to visualize the distance when you get closer than 300 meters (1000 feet) to the next turn, and it remains visible till you reach the turn.

  • Page 35: Gps Data Displayed

    4.4.1 GPS data displayed The virtual sky on the left represents the currently available satellites. The satellites are shown at their current positions. The GPS receives data from both the green and gray satellites. Signals from the gray satellites are only received, while green ones are used by the GPS to calculate your current location.

  • Page 36: Time Synchronization

    • yellow means 2D reception. A GPS position has been acquired, MioMap is ready for navigation, but the GPS is using enough satellites for calculating the horizontal position only. Elevation data is not provided, and the position error may be significant. •...

  • Page 37: Route Data Displayed (For Destination And Via Points)

    4.5.1 Route data displayed (for destination and via points) In the top section of the screen you see information about the current route. These fields are continuously updated while you keep this screen open. When you open the screen, all fields contain information on reaching your final destination.

  • Page 38: Distance Left

    that belongs to a via point, the route is colored only up to that via point. The rest of the line remains gray. 4.5.1.2 Distance Left This is the distance you need to travel on the route before reaching your final destination.
  • Page 39 warnings, so icons always show information for the whole route, even if the data fields display values from your current position to a via point only. Click on any of the icons to show its description. A few samples of the available icons: •...

  • Page 40: Fit To Screen

    4.5.3 Fit to screen Tap this button to display an overview of the whole recommended route. You will jump to the Split screen with a 2D North-up view so that you can check where the route takes you. 4.5.4 Parameters This button opens the Route parameter settings screen (Page 79) otherwise opened from the Route menu (Page 49).

  • Page 41: Itinerary

    The events are numbered. The number also appears on the map for easy recognition. Tap the up or down arrow buttons to see more TMC messages. Tap any of the list items to have it shown in the center of the map. Tap it again to see its details.

  • Page 42: Menu

    Tap Avoid Maneuver to exclude this turn from your route, Avoid Road to exclude the road that starts with this turn, or tap Cancel to return to the map. 4.7 Menu The Menu button can be found in the bottom left corner of the map screen. Tapping this button brings up a menu that allows you to access some of the most frequently used functions of MioMap.

  • Page 43: 3D Map (Switch)

    4.7.2.1 2D / 3D Map (switch) This button switches between the top-down and the perspective views of the map screen. The states of this button are: In 3D mode the map shows a perspective view. You can use the tilt buttons (Page 27) to change the angle of the view if they are enabled with the switch right from this one (Page 43).

  • Page 44: Manage Poi (Points Of Interest)

    Turn on or off the night colors manually to override the automatic color scheme switching. Note: Using this option turns off the Automatic Night Colors feature. You need to re- enable it at the General settings screen (Page 72) to have the colors change automatically again.
  • Page 45 Tapping again the highlighted POI group (except for My POI – described later) opens the list of subcategories of that group. Here you cannot see bicolor subgroups, as visibility can only be set for the top two levels of categories. Showing and hiding a subgroup is done the same way as for the main groups.
  • Page 46 necessarily need to create POI groups in advance. You can do it while saving a new POI. • Delete: you can delete any of your previously saved My POI groups. This will delete all POIs in that group. MioMap will ask you to confirm this action. •...

  • Page 47: Popup Information (Switch)

    • Delete: you can delete any of your previously saved POIs. MioMap will ask you to confirm this action. 4.7.2.5 Popup Information (switch) This button enables or disables the popup information of the Cursor on the map screen. The states of this button are: When this feature is enabled, tapping the screen (activating the Cursor, a radiating red dot) also opens a pop-up box with the selected street name, house number and the name of the nearby POIs, if any.
  • Page 48 When a track log is being recorded, a new line appears in this list with an underscore, as newly recorded track logs are not shown in the map normally. Tip: If you wish to see the track log currently being recorded, tap on it twice to make it visible.

  • Page 49: Route Tab

    • Track log options: this button in the upper right corner leads to a settings screen where you can set up the track logging parameters: • Update interval is how often track points will be saved. Position information is normally received once a second from the GPS. If you do not need such a detailed log, you can increase this number to save track log space.
  • Page 50 It brings up a menu with four options. Using one of these functions you can modify the current route. Recalculate This function repeats the route calculation based on the same settings as used to calculate previously. This possibility is typically used when automatic off-route recalculation is disabled.

  • Page 51: Delete

    Note: When you use this feature, MioMap will keep on excluding the same part of the map from later routes until you manually delete the route (Page 51), or restart MioMap. Cancel This option returns directly to the map screen without recalculating the active route. If you choose this option when manual route recalculation is configured (Page 76), navigation stops and will be activated again when you are back on your original route.
  • Page 52 • Route summary: tapping the Mode button again will show an overview of the route that contains only the significant roads and intersections. Show Tap this button to see the highlighted list item on the map. This will help you identify route events in the list.

  • Page 53: Fly Over

    4.7.3.4 Fly Over This feature has no navigation function, it merely provides a quick view of the route. It will present a simulation of the route showing what you will see later when navigating. Lifelike simulation Tap the Fly Over button. In this mode the simulation is run at normal speed (using the speed limit of the streets and roads in the route), and voice instructions are also played.

  • Page 54: Info

    is for via points only. Your starting point and destination remain in their positions, of course. • Up and Down: using these buttons you can reorder the list by moving the highlighted item up or down in the list. 4.7.3.6 Info This button opens the Route Information screen described here: Page 36.

  • Page 55: Camera Types

    4.8.1 Camera types There are four types of speed cameras: 4.8.1.1 Fixed cameras Some cameras stand by the roadside, looking in one direction, measuring one or both directions of the traffic. They measure your current speed. For these cameras you can specify the controlled traffic direction and the speed limit. MioMap will warn you when you approach these cameras in the measured direction.

  • Page 56: Section Control Cameras

    4.8.1.4 Section control cameras These cameras work in pairs, and do not measure your current speed but your average speed between the two cameras. Both will identify your car, and record the exact time you pass them. The difference between the two points of time will be used to calculate your average speed.

  • Page 57: Speed Limit Checked

    4.8.3 Speed limit checked As additional information, the speed limit checked by the camera is given for fixed, built-in and section control cameras. When you manually save a camera location from the Cursor menu (Page 31), the speed limit of the road (if available) is used by default, but you can change this value with the given control: 4.8.4 Add a new camera or edit an existing one You can add new cameras, delete or modify the parameters of existing ones using...

  • Page 58: List Of Tmc Messages

    If public TMC data is broadcast at your location, MioMap will automatically take into account the TMC information received. You do not need to set anything in the program. The receiver will automatically search the FM radio stations for TMC data, and the decoded information will immediately be used in route planning.

  • Page 59: Selected Fm Radio Station

    4.9.2.1 Selected FM radio station The name and frequency of the selected radio station will appear at the top of this window, together with signal strength information indicated by a bar similar to the GPS satellite signal strength bars on the GPS Data screen. If there are no radio stations broadcasting TMC data in your area, the receiver keeps on searching.

  • Page 60: Sorts Events By Distance / Type

    4.9.2.5 Sorts events by distance / type The list of traffic events can be ordered by their distance from the current position, or by their type. Tap this button to toggle between the two possibilities. 4.9.2.6 Use traffic information This button is enabled by default, which means that TMC messages are used in route planning.

  • Page 61: Find

    5 Find One of the most frequently used functions of MioMap is selecting the destination. Once you have the destination, you can start navigating. Getting to this point should be as fast as possible. MioMap provides you with a versatile search engine designed to find your chosen destination after only a few taps on the screen.

  • Page 62: Using The Find Menu

    Note: When appearing automatically, the Cursor menu remains open for a few seconds only. If you decide not to choose any of the actions listed, the menu closes automatically. When you open it manually, it will remain until you close it or switch to another screen.

  • Page 63: Selecting The City, State And Country To Search In

    You enter the module at Level 3. From this point you can go forward (down) to give the name of the street, then the house number or intersection, or backward (up) to change the city, state or country to search. 5.3.1.1 Selecting the city, state and country to search in The first screen of the address-search module is the list of recently used cities (and states in Australia).
  • Page 64 screen, where you can select the desired city by entering a few letters of its name or some digits of its postcode, then select from the list of results automatically given by the program if the matching items can be displayed on one page, or displayed on more pages if you tap Done after entering some letters.
  • Page 65 Tip: If you have finished entering the street name and the matching names are still on more than one page, just tap List, and select your desired city from the list. Turn the pages with the arrow buttons in the bottom right corner. Tip: In case you are looking for a city name that has more than one word, you can reduce the list of matches faster if you enter a few letters from each word.

  • Page 66: Selecting A Street Or A City

    Note: In Australia you can skip this part by tapping List before entering any letters. This way you can search for a street name in the whole state. In other countries this step is compulsory. If you press List before entering any letters, the list of cities will appear in alphabetical order.

  • Page 67: Selecting A House Number Or The Midpoint Of The Street

    Tip: If you are looking for an intersection, choose the street that has a rare or unusual name first. This way you need to enter fewer letters to get the list of results. You may also choose the shorter of the two streets first. This way it will be faster to choose the second one from the list of crossing streets after the first street has been selected.

  • Page 68: Find In History

    5.3.2 Find in History If you have used Find before, or saved map points as POIs or picked and used points of the map before, they all appear in the History list. This list is ordered by the time the points were last used. The most recently used locations are always at the beginning of the list.

  • Page 69: Find A Poi

    Entering a latitude/longitude pair is easy. The left field contains the latitude. It starts with an ‘N’ (North) or ‘S’ (South) letter. This tells MioMap whether the point is in the Northern or the Southern hemisphere. Use the button to change the hemisphere. Enter numbers for the latitude.
  • Page 70 Once you tap the Change ref. button, you are presented with these choices: • Address: you can specify an address to be searched around, or a city to search in. The center of this city will be used as the reference point. •...

  • Page 71: Find One Of The Favorites (Home/Work)

    Once the desired POI item is selected, MioMap will show its details. Tapping OK will return to the map with the selected POI in the center (or starts navigating to it if the POI search was started from the Main menu). Tapping the arrow in the top left corner returns to the search results.

  • Page 72: Settings

    6 Settings MioMap provides several settings in order to let you customize the functions of the program. The Settings screen can be accessed directly from the Main menu screen (Page ) and from the map screens by using the battery icon (Page 30), while some of its sub-screens are accessible from other parts of the program.

  • Page 73: Automatic Night Colors

    6.1.2 Automatic Night Colors Using the automatic night mode, MioMap will change between the daylight and night color schemes a few minutes before sunrise and a few minutes after sunset based on the time and location information provided by your GPS. Once you set a permanent color scheme in the Quick menu (Page 43), this automatic mode turns off.

  • Page 74: Alternative Speeding Tolerance

    6.1.4.3 Alternative speeding tolerance If the speed limit of the current road reaches the value set at Alternative speed limit, this setting will replace the basic one set at the top of this screen. The slider and the selector work exactly as the basic ones described here: Page 73. Example: to let you better understand how this feature works, here is an example.

  • Page 75: Audible Warning

    6.1.6.1 Audible Warning You can disable the audible warning; have a simple warning (when you are warned only if you exceed the speed limit when approaching a camera); or a complex sound with repeated beeps as you approach the camera. In case of section control cameras, you will also hear these beeps while you are between the two cameras (these cameras work in pairs).

  • Page 76: Set Favorite Destinations

    6.1.7 Set Favorite Destinations You can select two of your most frequent destinations to be your favorites (Page 71). You can start navigating to either of them by only two taps on the screen. The original names of these points are Home and Work. You can rename them and specify their locations.

  • Page 77: Disabled

    Your options are: • Recalculate: MioMap will recalculate the route with the previous settings. The result is the same as if Automatic recalculation was selected. • Drop Next Via Point / Delete Route: MioMap will remove the next via point from the list and recalculate the route without it.

  • Page 78: Voice Guidance Volume/Switch

    6.2.2 Voice guidance volume/switch The switch on the left can turn on or mute MioMap's audible guidance (voice instructions and speed camera warning). When turned on, the slider on the right will adjust the loudness of voice prompts. In its leftmost position the voice guidance is suppressed, in its rightmost position the master volume applies.

  • Page 79: Route Parameter Settings

    6.3 Route parameter settings This is a very important page. Settings here determine how routes will be calculated. This screen is directly accessible from the Route Information screen (Page 36). 6.3.1 Route Here you can choose from three different route types. 6.3.1.1 Short Choosing Short will result in a route that has the smallest total distance of all possible routes between the given points.

  • Page 80: Road Types To Include/Exclude

    • Taxi • Bus • Emergency • Bicycle • Pedestrian 6.3.3 Road types to include/exclude To let the route fit your needs you can also set which road types are to be considered for or to be excluded from the route if possible. Note: Excluding a route is a preference.

  • Page 81: Permit Needed

    6.3.3.5 Permit needed To use some roads or enter some areas you may need special permit or permission from the owners. These roads are excluded from your routes by default. Use this switch if your vehicle is authorized to enter. 6.3.3.6 Toll Roads Toll roads are included in your routes by default.

  • Page 82: Units

    6.4.3 Units You can set the distance units to be used by the program. MioMap may not support all of the listed units in some voice guidance languages. If you select a measurement unit that is not supported by the chosen voice guidance language, you will see a red warning message under the selector.

  • Page 83: Power Management

    These settings are independent of the settings of the other applications of MioMap v3.3. 6.5.2.1 Power management At the top of the screen you can set how the backlight will behave when the screen has not been touched for a while. Backlight always on You can choose to have the lights always on.

  • Page 84: Backup Data

    6.5.3.1 Backup Data You can make a safe copy of the whole user database on a memory card. Tap this button to copy all user data and settings on the memory card. The backup is always created with the same file name; so backing up data will always overwrite previous backups.

  • Page 85: Daylight / Night Color Profile

    6.5.4.1 Daylight / Night color profile MioMap comes with different color schemes for both daylight and night use. There is always one selected daytime scheme and one selected night-time scheme. MioMap uses these when switching from day to night and back. Tap the appropriate button and select a new scheme from the list.

  • Page 86: Enable Smart Zoom

    6.5.5.1 Enable Smart Zoom Use this switch to enable or disable Smart Zoom. When disabled, the zoom and tilt levels on map screen during navigation are fixed, and you can set them manually using screen buttons (Page 27). Turn this feature on to let MioMap zoom and tilt the map automatically to always show you the best view for your navigation needs.

  • Page 88: Troubleshooting Guide

    7 Troubleshooting guide Thank you again for purchasing our product. We hope you will enjoy every minute of using it. However you may face difficulties before you get really accustomed to MioMap. In such cases, please, refer to this table of frequently encountered problematic situations.
  • Page 89 The ‘Route To’ button is for starting a new route only. For a single route you tap this when the destination is selected. Multi-point routes can be created after you have established a single route. Add points to the single route by using the ‘Add Via’ and ‘Continue’...

  • Page 90: Glossary

    8 Glossary The manual may contain many technical terms. Please look below for an explanation if you are unfamiliar with some of them. 2D/3D GPS reception: The GPS receiver uses satellite signals to calculate its (your) position. Depending on the current positions of the ever moving satellites in the sky, and the objects in your environment, the signal that your GPS device receives may be weaker or stronger.
  • Page 91 Automatic day/night colors: Based on the time and position given by the GPS device, MioMap is able to calculate when the sun rises and sets at your current location on this particular day. Using that information MioMap can change between the day and the night color schemes a few minutes before sunrise and a few minutes after sunset (Page 73).
  • Page 92 on the screen. You can move the map to lose this position. Then the Follow button appears on the screen. Tapping it will re-enable Lock-to-Position. See also Page 27. Map Orientation: MioMap is able to rotate the map for your convenience. If you choose Track-up mode, the map will be rotated to look in the direction of your heading.

  • Page 93: End User License Agreement

    You use this product at your own responsibility and risk. Mio Technology Limited shall not assume any responsibility for damages arising from this product during driving or transportation or any violation of traffic regulations...

This manual is also suitable for:

Miomap v3.3 c320

Table of Contents