SECTION 7 – DISASSEMBLY AND REASSEMBLY
7-1. Disassembly Of Unit
Tools Needed:
3/8, 7/16, 1/2, 9/16 in
Miller Legend
Use Section 6-1 to determine if
trouble is in rotor, stator, engine or
a combination of these compo-
nents.
Remove sheet metal panels from
unit. Disconnect negative (–) bat-
tery cable from battery. Remove
spark plugs. Mark and disconnect
all stator leads.
Do not damage rotor or sta-
tor during this procedure.
Use hoist and lifting strap to re-
move the engine/generator as-
sembly.
ST-800 710-A
TM-428 Page 33