By moving the cursor in four directions you can reach
20 programmes in the same page. You can scroll the
pages up or down by pressing the navigation buttons
to see all the programmes in TV mode (except the AV
mode). By cursor action, programme selection is done
To change the name of a decided programme, select
the programme and press the RED button.
The first letter of the selected name will be highlighted.
button to change that letter and
button to select the other letters. By pressing the RED
button, you can store the name.
Select the programme which you want to insert by
navigation buttons. Press the GREEN button. By navi-
gation buttons move the selected programme to the
decided programme space and press the GREEN but-
To delete a programme, press the YELLOW button.
Pressing the YELLOW button again erases the se-
lected programme from the programme list, and the
programmes below shift one up.
APS (Auto Programming System)
When you press the BLUE button for APS, Auto Pro-
gramming System Menu will appear on the Screen.
All Prestored Programs
will be deleted
A.P.S. (Auto Programming System) Country
button to select your country. If you
want to exit from A.P.S. function, press the "BLUE"
When you press OK or RED button for starting APS,
all stored programs will be erased and the following
screen will be displayed:
P 03 - C 04
Whenever you press the "BLUE" button, A.P.S. func-
tion stops and Program Table appears on the screen.
If you wait until the end of A.P.S., Program Table is
displayed with the programmes found and located.
button to select the program number. You can also
enter a number via digit buttons on the remote control.
There are 100 program storage between 0 and 99.
Band can be selected either "C" or "S" by press
Channel can be changed by
PAL, SECAM, PAL60 or AUTO.
If Sound System is set to I, SECAM is not available for
the Colour System.
Note: In EXT mode, you can choose NTSC 3.58 and
NTSC 4.43 as well.
button to change the sound system to BG, ,
I, L, L', DK.
button to adjust the tuning.
English - 13 -
APS is running...
button, select Program. Press
button, select Colour System.
button to change the colour system to
button, select Sound System.
button, select Fine Tune. Press
button or Digit But-