Download Print this page

Volume Setting; Programme Selection (Direct Access); Menu System; Picture Menu - Hitachi 32LD8A20 A Instructions For Use Manual

Lcd colour television
Hide thumbs


AV Mode
Press the "TV/AV" button at the control panel on the
the TV to switch your TV to AV modes.
Operation with Remote Control
The remote control of your TV is designed to control
all the functions of the model you selected. The func-
tions will be described in accordance with the menu
system of your TV.
Functions of the menu system are described in the
following sections.

Volume Setting

Press " V +" button to increase volume. Press "V -"
button to decrease volume. A volume level scale
(slider) will be displayed in the middle at the bottom of
the screen.
Programme Selection (Previous or next
• Press "P-" button to select the previous programme.
• Press "P+" button to select the next programme.

Programme Selection (direct access)

Press digit buttons on the remote control to select
programmes between 0 and 9. TV will switch to the
selected programme. To select programmes between
10 - 999 (for IDTV) or 10-99 (for analogue), press the
digit buttons consecutively which programme you
want to select (eg. for programme 27, first press 2
and then 7). When it is too late to press second digit
button only the first digit programme will be displayed.
The limit of the delay time is 3 seconds.
Press directly the programme number to reselect single
digit programmes.Menu System

Menu System

Picture Menu



In picture menu if PC,YPbPr or HDMI modes are
selected, resolution information is displayed at the
bottom of the menu osd.
By pressing
button to choose from one of these options: Cinema,
Dynamic and Natural.
By pressing
Hint: Hue is displayed in picture menu when the TV
receives an NTSC signal.

Colour Temp

• By pressing
• Press
Cool, Normal and Warm.

Noise Reduction

By pressing
Low, Medium, High or Off.

Film Mode

Films are recorded at a different number offrames
per second to normal television programmes.
By pressing
this feature on when you are watchingfilms to see
the fast motion scenes clearly.

Picture Zoom

By pressing
buttons, to change picture zoom to Auto,
English - 10 -
button, select Mode. Press
button, select the desired Option.
button to set the level.
button select Colour Temp.
to choose from one of these options:
button select Noise Reduction.
to choose from one of these options:
button, select Film Mode.
button to set this feature On or Off. Turn
button select Picture Zoom.