Feed Adjustment - Epson SureColor F7070 User Manual

9. When Check 1 is displayed in the control panel, use the d/u buttons to select the
number recorded in step 8 and press the Z button.
10. Select the numbers for all colors and press the Z button.
11. The media setup menu will be displayed when you enter the pattern number for the last
color.

Feed Adjustment

Feed Adjustment is used to correct banding (horizontal banding, lines, or strips of uneven
color).
Two methods are available:
❏ Visually inspect print results and enter a correction by hand.
❏ Enter a correction during printing and inspect the results.
Note:
Feed Adjustment varies with the media used. Load the media for which feed adjustment is
required under the same conditions as the actual print job. For example, if you are using the auto
take-up reel unit for printing, the auto take-up reel unit should also be used for feed adjustment.
Furthermore, when installing the heavy roll media system, the media must be loaded and feed
adjustment performed again, even if once you adjust with the standard roll media system.
73
Basic Operations