Connecting An Hdmi Or A Dvi Device To The Hdmi Input - Hitachi 26LD5550U User Manual

Colour lcd television
Table of Contents

Advertisement

Connecting an HDMI or a DVI device to the HDMI input

The HDMI1 input receives digital audio and uncompressed video from a HDMI equipped device or
uncompressed digital video from a DVI equipped device.
When you connect the HDMI1 to a DVI device with a HDMI-to-DVI adapter cable, it only transfers the
video signal, so it is necessary to use separate analogue leads to transfer the audio signals.
Select the HDMI input mode (see P.11).
Note:
This set is classed as "HD-Ready". This
means that it is capable of displaying HD
(High Defi nition) signals when connected
to a suitable HD source, such as an
HD receiver or DVD player that has HD
capability, via HDMI, DVI, or Component
Video connections.
Some devices may not operate properly
with the TV.
HDMI, the HDMI logo and High-
Defi nition Multimedia Interface are
trademarks or registered trademarks
of HDMI Licensing LLC.
26
TV
HDMI - to - DVI adapter cable
(Rear view)
(HDMI type A connector)
To PC/HDMI1 Audio input
Selecting the HDMI audio input source
You must choose the appropriate HDMI audio input
setting for each connection, depending on whether the
source is equipped with a DVI or HDMI socket.
1
Select HDMI1 AUDIO, then press
ENTER.
Press
or
to select HDMI or DVI.
2
Press EXIT to return to the normal screen.
Note:
1080p is not supported and any device set to this resolution will
produce a blank screen on the set.
Follow the user's manual that came with the HDMI-system, which
you try to connect to this TV.
if there is no picture available via HDMI-connection, do connect via
SCART-cable fi rst. Use the HDMI-system's remote-control to call
the HDMI-system's setup-menu onto the screen.
Follow the HDMI-system's manual, to set its video-output to HDMI.
When successfully set to HDMI, select this TV's HDMI-input, as
described in here on page 11 (Select Video Input).
To DVI output
(not supplied)
HDMI cable
(type A connector)
(not supplied)
To HDMI output
Audio cable (not supplied)
DVI device
or
HDMI device
NICAM
AUTO
BASS
25
TREBLE
25
BALANCE
0
SURROUND
OFF
HDMI1 AUDIO
HDMI
HDMI

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents