Auto Setup; Quick Guide For Analog Menu Operation; Selecting The Video Input Source - Hitachi 26LD5550U User Manual

Auto setup

Your unit has an Automatic installation which
makes installation in your unit easy. When you
turn on the unit for the fi rst time, the Automatic
installation routine is activated. Using this
routine, you can select the on-screen language
and automatically search for and store all the
receivable analogue and digital (DVB) channels.
The Automatic station presetting feature is
for the set's built-in tuner only. If you have a
device such as a digital decoder (eg. Satellite
or Digital Terrestrial) connected (see P.27), you
would need to tune it in separately according
to its own instructions.
Preparation:
Press (Power) on the unit or press
on the remote.
1
AUTO INSTALLATION menu
will appear.
Press or to select the
fi rst line, then press ENTER. Press
select desired language.
Then press ENTER.
2
Press or to select
COUNTRY, then press
ENTER.
Press or to select your
country.
Then press ENTER.
3
Press or to select AUTO TUNING, then
press ENTER.
The confi rmation screen will be displayed.
Press ENTER to start automatic tuning.
Your TV will now automatically tune in all
available channels.
Your TV will tune the analogue channels fi rst,
then tune the digital channels.
Note:
• Please be patient - the Auto Tuning process
can take several minutes to complete.
When the programme on the screen stops changing
and the sound comes on, the search process is
complete.
Note:
• To cancel the Auto Tuning, press EXIT during the
process.
• If on the "AUTO INSTALLATION (COUNTRY)" screen
"UK" is selected, "Change No." and "Move To" cannot
be used in U.K. (see page 20)
THE AUTOMATIC TUNING PROCESS WILL
ONLY START BY ITSELF THE FIRST TIME YOU
SWITCH THE SET ON. HOWEVER YOU CAN
RESTART THIS PROCESS VIA THE MENU
SYSTEM (see page 12 for analogue channels,
and page 18 for digital channels).
Quick guide for ANALOG MENU
operation
Make sure the aerial connection and power
supply are connected as per the description on
previous page.
Preparations:
• Turn on the unit with the
unit. The
in green.
To change the unit to standby mode, press
remote control.
change from green to red. To turn on the unit from
standby mode, press
In standby mode, you can also turn the unit on with
(Channel)
control.
(On/Standby)
To turn off the unit press
unit - to completely switch it off, disconnect the mains
power supply.
Call ANALOG MENU and for example: Select
AUTO INSTALLATION
AUTO TUNING.
LANGUAGE
ENGLISH
COUNTRY
1
or to
2
3
AUTO INSTALLATION
LANGUAGE
ENGLISH
COUNTRY
UK
AUTO TUNING
4
Note:
• If no buttons are pressed for more than approx. 60
seconds, the MENU disappears automatically.

Selecting the video input source

Press INPUT SELECT to view a signal from
another device connected to your TV, such as a
VCR or DVD player. You can select each input
source depending on which input jacks you used
to connect your devices.
To select the video input source,
press / .
Then press ENTER within 6
seconds.
(On/Timer/Standby) indicator will light up
(On/Timer/Standby) indicator will
on the remote control again.
/ on the unit or P + / – on the remote
Press INPUT SELECT.
Select ATV. Press ANALOG MENU.
Press or to select
Press or to select AUTO
TUNING, then press ENTER
to enter the AUTO TUNING
menu.
... on the following pages the
MENU can be called in the
same way as here.
Press EXIT to return to the normal screen.
(Power) button on the
on the
(Power) button on the
.
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
INPUT SELECT
ATV
DTV
AV1
AV2
AV3
COMPONENT
11