Installing Batteries - Hitachi 22LD5750U User Manual

QUICK SET-UP GUIDE
1. CONNECTING YOUR AERIAL
(A) (B) (C) (D)
(A) Power supply: Connect the supplied power cable to
an AC 220-240V/50Hz mains power supply only - do
not attempt to connect it to any other type of supply.
Never try to repair a damaged AC power cord with

2. INSTALLING BATTERIES

1.
Open the battery compartment.
3. AUTO SETUP
Your television has an Automatic Tuning System which makes tuning in your television easy. This Automatic
tuning System scans the entire reception range in your area and automatically stores all available analogue
and digital channels of suitable signal strength in the correct order e.g. BBC 1 will tune into channel 1, BBC 2
will tune into channel 2, etc.
THE AUTOMATIC TUNING PROCESS WILL ONLY START BY ITSELF THE FIRST TIME YOU SWITCH
THE SET ON. HOWEVER YOU CAN RESTART THIS PROCESS VIA THE MENU SYSTEM. (see next
page.)
1. Press on the TV or remote control. The Auto Installation menu will appear first.
Press or to select LANGUAGE, then press ENTER. Press
press ENTER.
2. Press or to select COUNTRY, then press ENTER. Press
ENTER.
3. Press or to select AUTO TUNING, then press ENTER. The confirmation screen will be displayed.
Press ENTER to start automatic tuning.
Your TV will now automatically tune in all available channels.
Note: Please be patient - the Auto Tuning process can take several minutes to complete.
4. When the programme on the screen stops changing and the sound comes on, the tuning process is
complete.
Back Side
(L)
(M)
(J)
(E) (F) (G) (H)
2.
Install the R6 (AA-Size) batteries as
shown below.
insulation tape - this should be repaired by a specialist
or replaced. Do not let your pet loose near the cable.
Animals biting into the cable could receive a fatal
electric shock, and could cause a hazard to others.
(B) HEADPHONE jack: Plug headphones with a mini
plug (3.5 mm) into this jack.
(C) COMPONENT input: See P.43.
(K)
(D) AV2 input: Input for analogue AV-Signal (Composite
or S-Video). See P.43.
(E) DVB-T Digital audio output: digital output for CD/
DVD & DVB-T (see page 42).
(F) PC MONITOR input (PC): See P.39.
(G) PC/HDMI AUDIO input: See P.39, 40.
(H) HDMI input : See P.40.
(I) Scart socket (AV1): For the connection of scart cable.
See P.41~43.
(J) ANT: Plug in the antenna (aerial) here.
(K) C.I. slot: for DVB-T-PayTV (see page 22).
(L) Bracket holes: Fix a wall mounting bracket (not
supplied) here.
(M) To hang the television on a wall, remove these screws
and then remove a stand.
Before performing work spread cushioning over the
base area to lay the TV on.
or to select desired language, then
or to select your country, then press
MODEL 19LD5750U/22LD5750U
3.
Close the battery compartment.
AUTO INSTALLATION
LANGUAGE ENGLISH
COUNTRY UK
AUTO TUNING
ENGLISH
EXIT : END MENU: RETURN
AUTO INSTALLATION
LANGUAGE ENGLISH
COUNTRY UK
AUTO TUNING
UK
EXIT : END MENU: RETURN
AUTO INSTALLATION
LANGUAGE ENGLISH
COUNTRY UK
AUTO TUNING
AUTO TUNING
1%
EXIT : END MENU: RETURN