Zooming; Locating Desired Scene; Marking Desired Scenes; Zoom (For Dvd Playback) - Hitachi 22LD5750U User Manual

Playing in slow-motion (DVD/VCD)
Press or during playback.
Each time you press
speed changes.
To resume normal playback
Press PLAY ( ).
Note:
• The sound is muted during slow-motion playback.
• Reverse slow ( ) does not work on VCD.
Locating a chapter or track (DVD/VCD/Audio
CD)
Press or repeatedly to display the chapter
or track number you want.
Press to playback starts from the selected
chapter or track.
Press to locate succeeding chapters or tracks.
Playback starts from the beginning of the current
chapter or track.
Note:
• A prohibition symbol " " may appear at the upper
right of the screen. This symbol means either the
feature you tried is not available on the disc, or the
unit cannot access the feature at this time. This does
not indicate a problem with the unit.
Zooming (DVD/VCD)
This unit will allow you to zoom in on the frame
image. You can then make selections by switching
the position of the frame.
1
Press ZOOM
during playback.
The centre part of the image will be zoomed in.
Each press of ZOOM will change the ZOOM
1(x 1.3), 2 (x 1.5) and
2
Press / / / to view a different part of the
frame.
You may move the frame from the centre
position to UP, DOWN, LEFT or RIGHT direction.
3
In the zoom mode, press ZOOM repeatedly to
return to a 1:1 view (
Note:
• You can select the Pause or Slow in the zoom
mode.
• Some discs may not respond to zoom feature.
Locating desired scene (DVD/VCD/
Audio CD)
Use the title, chapter and time recorded on the
DVD disc to locate the desired point to playback.
In the case of VCD/Audio CD discs, time and track
are used to locate the desired point to playback.
To check the title, chapter/track and time, press .
1 Press JUMP
during playback
or resume stop
mode.
or , the slow-motion
1
3 (x 2.0).
Off).
Jump
Title
Chapter
Time
2
Press or to select the "Title/Track",
"Chapter" or "Time".
3
Press Number buttons (0–9) to input the
number.
• If you input a wrong number, press CANCEL.
• Refer to the package supplied with the disc
to check the numbers.
4
Press ENTER. Playback starts.
• When you change the title, playback starts
from Chapter 1 of the selected title.
• Some discs may not work in the above
operation.
Note:
• In case of the Audio CD and Video-CD, only Track
and Time can be selected.
• In case of the Video-CD playback with PBC, the
JUMP does not work. Turn off the PBC (see page
26).

Marking desired scenes

Marking the scenes (DVD/VCD/Audio CD)
The unit stores the points that you want to watch
again up to 3 points. You can resume playback
from each scene.
1
Press MARKER
during playback.
2
Select the blank Marker using
Then press ENTER at the desired scene.
• Repeat this procedure to set the other 2
scenes.
3
Press MARKER to clear this display.
Returning to the scenes (DVD/VCD/Audio CD)
1
Press MARKER
during playback
or stop mode.
2
Press or to select the Marker 1-3.
3
Press ENTER.
Playback starts from the marked scene.
To cancel the Marker
Follow the above steps 1~2, then press
CANCEL.
Note:
• Some discs may not work with the marking operation.
• The marking is cancelled when you eject the disc or
turn the power off.
• Some subtitles recorded around the marker may fail
to appear.
• In case of Video CD with PBC, Marker function is
prohibited.
• Marker function does not work with MP3/JPEG CD.
Marker 1
Marker 2
Marker 3
or .
Marker 1
00 27 54
Marker 2
01 16 25
Marker 3 02 08 31
27