Table of Contents
Advertisement
MAIN MENU OPERATION (continued)
Confi guration Menu
This menu provides various ways to protect your panel, reduce power consumption, and set up utilizing the useful
functions, such as DVB subtitle setting.
The menu items indicated by * can be automatically stored.
Selected Items
Screen Saver*
Screen Wipe
Black Side Panel
Video Power Save*
Default Zoom*
ECO Mode*
Quick Start Options*
Auto Off*
LED Mode*
Reset
30
Configuration
1/2
Screen Saver
Off
Screen Wipe
Black Side Panel
On
Off
Video Power Save
Default Zoom
Panoramic
ECO Mode
Off
Quick Start Options
On
Auto Off
On
LED Mode
Flash
Reset
Select
Enter
Return
Off
This helps to reduce image retention by shifting the whole
2Min.
picture (in small amounts) around the screen at set
intervals.
10Min.
You can select the interval between each shift.
20Min.
This displays the white pattern to reduce the image
On
retention.
On: Continuous Operation
60Min.: Limited Operation for 60 minutes. After
60Min.
60 minutes, TV goes to standby mode.
This can change the colour of sidebars showing up in
Off
normal mode. (Off: grey, On: black)
It is recommended to set Off to reduce image retention.
This cannot be stored. (The default setting is Off.)
Please note that it is not available whilst operating Photo
On
Input function.
During AV input, this helps to reduce power consumption
Off
when there is no video signal detected for about 10
seconds. In case of selecting AV input terminal which
does not have signal input, it changes the power status to
power save mode in AV4/HDMI1,2 and standby mode in
On
other AV input. (See
Panoramic
4:3
This allows you set how a 4:3 picture will be displayed if
you have selected Auto from the Zoom mode.
Full
14:9 Zoom
Off
This can reduce the power consumption by decreasing
1
contrast.
2
Off
Set On if you want to turn TV On quickly.
If set On, power consumption at standby will be increased.
On
When no airwave has been received and no operation
Off
has been made for 10 minutes in TV/DTT mode, it turns
On
to standby mode automatically.
This can set the operation of indicating lamp.
Off
• Flash: Indicating lamp pulses in blue when turning on. It
blinks in blue when using remote control.
• Off: It will not operate when turning On and using remote
Flash
control.
Each item on this menu screen can be restored to the
original factory settings by pressing
Configuration
2/2
Luminance Manager
On
Default Audio
English
Secondary Audio
English
West Europe
Teletext Language
Subtitle
On
Default Subtitle
English
Secondary Subtitle
English
Subtitle Type
Hearing Impaired
Reset
Select
Adjust
Return
<Example: ***T01E>
Setup hint
61
in details.)
button.
OK
Hide quick links:
Advertisement
Table of Contents
