CONNECTION (continued)
Connecting Procedure (continued)
3. Connecting to External Equipment
Terminals on Rear
AV1 can be connected to the equipment with Composite/S-Video/Audio input, and Composite/Audio output.
The output signal can support not only Analogue but also Digital Terrestrial TV signals.
INPUT
Composite/S-Video/Audio
If STB is connected to AV1 in France, it descrambles some of the Pay TV images by resending the signal again (In/Out).
OUTPUT
Composite/Audio
When you are watching either TV or DTT broadcasting from AV1, you can switch to the other by setting
"Scart Output" in Initial Setup menu. For example, whilst you are watching TV, it is possible to record the
DTT programme. Refer to
AV2 and 3 can be connected to the equipment with Composite/RGB/Audio input, and Composite/Audio output.
INPUT
Composite/RGB/Audio
OUTPUT
Composite/Audio
IN
OUT
27
about "Scart Output" in Initial Setup menu.
IN
OUT
[Example]
DVD player/recorder
OUT
[Example]
(Recording Device)
IN
[Example]
DVD player/recorder
OUT
[Example]
(Recording Device)
IN
VCR
Set-Top Box
VCR
VCR
Set-Top Box
VCR
15