Displaying An Image In Full Screen - Hitachi MP-J1 User Manual

Displaying an image in full screen

One selected image file on Thumbnail menu can be displayed in full screen.
Use ▲, ▼, ◄ and ► buttons to move a cursor to select an image on Thumbnail
menu.
Then, push ENTER button on the remote control or INPUT/ENTER button on the
projector to display the selected image in full screen.
While in full screen mode, if one of these buttons is pushed one more time, the
projector is back to Thumbnail display.
1) Button operation for still image
While still image is shown in full screen, the following operation can be made from
the control panel on the projector or the remote control.
There are two type of KEY configurations for ▲/▼/◄/► button available.
USB STORAGE of the OPTION menu)
Button
UP
DOWN
RIGHT
LEFT
"ENTER"
on Remote control
"INPUT/ENTER
on Control panel
Key CONFIG. 1
Turn around the image 90
degree clockwise.
Turn around the image 90
degree anticlockwise.
Display following image.
Display previous image.
Displays thumbnail.
Full screen display
Key CONFIG. 2
Display previous image.
Display following image.
Turn around the image 90
degree clockwise.
Turn around the image 90
degree anticlockwise.
Displays thumbnail.
USB STORAGE
:
(47
55