Correcting The Keystone Distortions; Using The Magnify Feature - Hitachi MP-J1 User Manual

Table of Contents

Advertisement

Operating

Correcting the keystone distortions

1.
Press the KEYSTONE button on the remote control. A dialog
will appear on the screen to aid you in correcting the distortion.
2.
Use the ▲/▼ cursor buttons to select the AUTO or MANUAL
operation, and press the ► button to perform the following.
(1) The AUTO executes automatic vertical keystone correction.
(2) The MANUAL displays a dialog for keystone correction.
Use the ▲/▼ buttons for adjustment.
To close the dialog and complete this operation, press the
KEYSTONE button again. Even if you do not do anything, the
dialog will automatically disappear after a few seconds.
● The adjustable range of this correction will vary among inputs. For some input,
this function may not work well.
● When V:INVERT or H&V:INVERT is selected to the MIRROR item in the
SETUP menu, if the projector screen is inclined or angled downward, this
function may not work correctly.
● When the zoom adjustment is set to the TELE (telephoto focus), the automatic
keystone distortion correction may be excessive. This function should be used when
the zoom adjustment is set to the full WIDE (wide-angle focus) whenever possible.
● When the projector is placed on the level (about ±0°), the automatic keystone
distortion correction may not work.
● When the projector is inclined to near ±30 degree or over, this function may not work well.
● This function will be unavailable when Transition Detector is on (46).

Using the magnify feature

1.
Press the ON button of MAGNIFY on the remote control.
The "MAGNIFY" indication will appear on the screen (although
the indication will disappear in several seconds with no
operation), and the projector will go into the MAGNIFY mode.
2.
Use the ▲/▼ cursor buttons to adjust the zoom level.
To move the zoom area, press the POSITION button in the
MAGNIFY mode, then use the ▲/▼/◄/► cursor buttons to move the
area. And to finalize the zoom area, press the POSITION button again.
To exit from the MAGNIFY mode and restore the screen to normal,
press the OFF button of MAGNIFY on the remote control.
● The projector automatically exits from the MAGNIFY mode when the input
signal is changed, or when the display condition is changed.
● Although in the MAGNIFY mode, the keystone distortion condition may vary, it
will be restored when the projector exits from the MAGNIFY mode.
NOTE • The zoom level can be finely adjusted. Closely watch the screen to
find the level you want.
8
KEYSTONE
COMPUTER/
STORAGE
SEARCH
VIDEO
ASPECT
AUTO
BLANK
MAGNIFY
HOME
PAGE UP
VOLUME
ON
PAGE DOWN
MUTE
END
OFF
FREEZE
MY BUTTON
KEYSTONE
1
2
MENU
POSITION
ENTER
ESC
RESET
MAGNIFY
ON/OFF
COMPUTER/
STORAGE
SEARCH
VIDEO
ASPECT
AUTO
BLANK
MAGNIFY
HOME
PAGE UP
VOLUME
ON
PAGE DOWN
MUTE
END
OFF
FREEZE
MY BUTTON
KEYSTONE
1
2
MENU
POSITION
ENTER
ESC
RESET

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents