Hitachi MP-J1 User Manual page 54

USB STORAGE
Playing Slide show (continued)
SLIDE SHOW items (continued)
Item
MODE
SCREEN EFFECT
NOTE 4
• If the number specified for [START] is bigger than the number specified for
[STOP], slide show is not executed.
• When the file size selected for SLIDE SHOW is big, the actual interval time
may be longer than the set time at [INTERVAL] menu.
• When a motion image is selected for SLIDE SHOW, the next slide will be
displayed after the play of the motion image is ended, regardless of whatever
is set at [INTERVAL] menu.
• When [MODE] is set to
hold on screen till either of ENTER button on the remote control or INPUT/
ENTER button on the projector is pushed.
54
Select SLIDE SHOW playing at ONE TIME or ENDLESS.
1. Select [MODE] using ▲, ▼, ◄ and ► buttons, then push
ENTER button on the remote control or INPUT/ENTER button on
the projector, so that [MODE] setting can be selected.
2. Change [MODE] setting using ▲ and ▼buttons.
ONE TIME
(Playing Slide Show
only one time)
3. Get out from the status that [MODE] setting is selectable, by
pushing ENTER button on the remote control or INPUT/ENTER
button on the projector.
Select SCREEN EFFECT for slide change in SLIDE SHOW.
1. Select [SCREEN EFFECT] using ▲, ▼, ◄ and ► buttons, then
push ENTER button on the remote control or INPUT/ENTER
button on the projector so that [SCREEN EFFECT] setting can
be selected.
2. Change [SCREEN EFFECT] setting using ▲ and ▼ buttons.
OFF
ó
(no effect)
3. Get out from the status that [SCREEN EFFECT] setting is
selectable, by pushing ENTER button on the remote control or
INPUT/ENTER button on the projector.
ONE TIME
"
Description
ENDLESS
ó
(Playing Slide Show
1
ó
(Sliced IN) (Minced IN)
, the last slide of the presentation will be
"
endless)
2