Fire-Lite Alarms BB-17F Product Installation Document

Overview

The BB-17F Battery Box may be used to house up to two 17AH batteries. It mounts directly below the FACP cabinet.
Knockouts are provided on the top surface of the battery box.

Inventory

The BB-17F Battery Box comes with a cabinet, a box cover, and four self-threading screws.
FACP
BB-17F Battery Box
Battery Box = 8.5" (21.59 cm)
Product Installation Document

Installation

1. Remove knockouts in the bottom of the FACP cabinet and
the top of the BB-17F cabinet.
2. Align knockouts in FACP and BB-17F. Anchor the BB-17F
to the wall using 1/4" diameter holes in back of cabinet.
3. Run conduit between the BB-17F cabinet and the FACP
cabinet. Make sure there is at least 6" (15.24 cm) of clearance
between the BB-17F and the FACP (see illustration at left).
4. Run battery cable through conduit from FACP into battery
box. Connect cable to batteries.
5. Secure the BB-17F cover to cabinet using supplied self-
6 inch (15.24 cm)
threading screws.
minimum
clearance
BB-17F Battery Box
Battery Box = 14.5"
(37.38 cm)
One Fire-Lite Place
Northford, CT 06472-1653 USA
203-484-7161 • FAX 203-484-7118
www.firelite.com
BB-17F Battery Box
PN 15736:A2 3/3/2011 11-146
Depth = 4.75"
(12.07 cm)