Wake On Ring Connector: Jmdm1; Irda Infrared Module Header: Jir2 - MSI 645 Ultra MS-6547 Manual

Chapter 2

Wake On Ring Connector: JMDM1

This connector allows you to connect to a modem card with Wake On
Ring function. The connector will power up the system when a signal is re-
ceived through the modem card.
MDM_WAKEUP
NC
1

IrDA Infrared Module Header: JIR2

This connector allows you to connect to IrDA Infrared modules. You
must configure the setting through the BIOS setup to use the IR function. The
JIR2 is compliant to Intel Front Panel I/O Connectivity Design Guide.
5VSB
NC
JMDM1
2-16
5 1
JIR2
6
2
JIR2 Pin Definition
Pin Signal
1 NC
2 NC
3 VCC
4 GND
5 IRTX
6 IRRX