Download Print this page

Mercedes-Benz V60 Installation Instructions Manual

Adaptor with bluetooth wireless technology

Advertisement

Quick Links

• Accessories

Installation Instructions

Mercedes-Benz V60 adaptor with
®
Bluetooth
wireless technology

Advertisement

loading

Summary of Contents for Mercedes-Benz V60

  • Page 1: Installation Instructions

    • Accessories Installation Instructions Mercedes-Benz V60 adaptor with ® Bluetooth wireless technology...
  • Page 2: Wireless Technology

    Mercedes-Benz V60 adaptor with ® Bluetooth wireless technology Page M+P-03F-6306...
  • Page 3 Phones can be utilized inside Mercedes-Benz vehicles. Validity Please contact your Mercedes-Benz Dealer to validate if your vehicle is supported. The vehicles need to have the Mercedes-Benz mobile telephone kit installed and a ® Mercedes-Benz-approved Bluetooth mobile telephone. Approved mobile telephones are listed and can be purchased on the Internet at www.wireless4mb.com or...
  • Page 4 COMAND Operator's Manual and mobile telephone manual. Please refer to them for reference. Use of a mobile telephone other than a Mercedes-Benz approved/recommended model may result in improper performance and cannot be supported or serviced by Mercedes-Benz. - 2 -...
  • Page 5 Bluetooth Make sure that the starter switch is in position 1, 2 or 3 (see the vehicle Operator's Manual). M+P-03F-6307 Insert the Mercedes-Benz V60 adaptor with ® Bluetooth (1) into the connector (2) to engage it into the cradle (3).
  • Page 6 Notes Make sure that the starter switch is in position 1, 2 or 3 (see the vehicle Operator's Manual). In order to be paired, the Mercedes-Benz ® V60 adaptor with Bluetooth must be connected into the cradle and the LED button (4) must be flashing slowly.
  • Page 7 (see the mobile telephone manual). The LED button (4) will light up continuously, the mobile telephone is now paired and has stored its information in the Mercedes-Benz ® V60 adaptor with Bluetooth The connection between the mobile telephone and the Mercedes-Benz V60 ®...
  • Page 8 (see the vehicle Operator's Manual or the COMAND Operator's Manual.) The Signal Strength indicator shows the status of Mercedes-Benz V60 adaptor. This bar display represents the following: M+P-03F-6411 ® •...
  • Page 9 If the pairing process is unsuccessful, remove the Mercedes-Benz V60 adaptor ® with Bluetooth from the cradle (see page 11). Re-insert the Mercedes-Benz V60 ® adaptor with Bluetooth and pair it with the mobile telephone (follow the pairing procedure found on page 4).
  • Page 10 COMAND unit. Not every ring-tone of the mobile telephone is supported by the COMAND or radio. 3-way-calling is not supported from the Mercedes-Benz V60 adaptor with ® Bluetooth . An audible peep will notify a waiting call.
  • Page 11 Connecting the mobile telephone and the Mercedes-Benz V60 adaptor with ® Bluetooth manually The mobile telephone can be used to connect manually to the Mercedes-Benz V60 ® adaptor with Bluetooth (see mobile telephone manual). Notes Before manual connection, the mobile...
  • Page 12 ® Bluetooth automatically When the starter switch is in position 1, 2 or 3 (see the vehicle Operator's Manual), a connection between the mobile telephone and the Mercedes-Benz V60 adaptor with ® Bluetooth will be established. ® Disconnecting the Bluetooth...
  • Page 13 Errors If the LED button (4) flashes very rapidly make sure the LED button (4) is not stuck in the Mercedes-Benz V60 adaptor with ® Bluetooth If the LED button (4) continues flashing very rapidly or if the connection between the mobile telephone and the Mercedes-Benz ®...
  • Page 14 After a TELEAID call you need to initiate one call from the handset or wait for an incoming call. © 2005, Mercedes-Benz Accessories GmbH Not to be reprinted, translated or otherwise reproduced, either wholly or in part. Mercedes-Benz Accessories GmbH, Stuttgart ·...