Assembly - Magic Chef MCSPZO12ST Instruction Manual

ASSEMBLY

Crumb Tray
1. Remove the crumb tray from the Pizza Oven.
2. Using one small screw and one black knob enclosed in the parts bag, hold the black knob to
the outside of the crumb tray at the center hole and push small screw and tighten.
3. Slide completed crumb tray assembly back into its original position in the Pizza Oven.
Handle Assembly
1. Remove food rack cover and food rack from the Pizza Oven.
2. Lay the food rack on a stable countertop with loop facing up and slightly over the edge of
the counter.
3. Slip the slot on the front of the food rack cover over the loop so the food rack cover rests
flat against the food rack.
4. Take the handle assembly and rotate the handle and bracket so they lie flat. Lay the bracket
slot over the food rack loop on top of the food rack cover.
5. As a single unit, simultaneously rotate the handle and the food rack cover towards you.
6. Using provided parts, slide the large bolt through the round hole, capturing the loop, handle
bracket and the food rack cover. Thread the thumb nut onto the large bolt from the
opposite of the food rack and tighten.
7. Rotate the assembled handle down and slide the completed food rack back into its original
position in the Pizza Oven.
WARNING:
Improper assembly of the handle to the food rack could cause the food rack to rotate and fall
when food is removed from the Pizza Oven. Do not attempt to grab hot foods with bare hands
when removing food from the Pizza Oven.
8