Fujitsu Stylistic ST6012 Bios Manual page 10

IrDA Port Configurations Submenu of the Advanced Menu
The IrDA Port Configurations submenu is for setting the parameters of the infrared port.
Info
Infrared Port:
Mode:
I/O Address:
Interrupt:
DMA Channel:
F1 Help
ESC Exit
Table 1: Fields, Options and Defaults for the IrDA Port Configurations Submenu of the Advanced Menu
Menu Field Options
Infrared Port: Disabled
Enabled
Auto
Mode: IrDA
FIR
I/O Address: 3F8 - 3FF
2F8- 2FF
3E8 - 3EF
2E8 - 2EF
Interrupt: IRQ 3
IRQ 6
IRQ 10
IRQ 11
DMA Channel: DMA 1
DMA 3
Phoenix SecureCore(tm) Setup Utility
System Advanced
IrDA Port Configurations
[Enabled]
[FIR]
[2E8 - 2EF]
[IRQ 6]
[DMA 3]
Select Item -/Space
Select Menu Enter
Figure 1. IrDA Port Configurations Submenu
Default
[Enabled]
[FIR]
[2E8 - 2EF]
[IRQ 6]
[DMA 3]
Security Boot Exit
Change Values
Select Sub-Menu
Description
Configures the infrared port using either no configuration (Disabled), a
user defined configuration (Enabled), or by allowing the BIOS or OS to
choose the configuration (Auto).
When the infrared port is enabled this option is available allowing the
user to set the mode for the infrared port.
Allows user to set the infrared port I/O address when the infrared port is
Enabled.
Allows user to set the interrupt number when the infrared port is
Enabled.
Allows user to set the infrared port DMA Channel when the infrared
port is Enabled.
Item Specific Help
[Disabled]
The port is disabled.
[Enabled]
The port is enabled
with user configuration.
[Auto]
Plug & Play OS
configure the port.
F9 Setup Defaults
F10 Save and Exit
10