Adjusting The Background Screen; Setting The Opening Screen; Changing The Image On The Opening Screen; About Usable Image Data - Eclipse AVN6620 Owner's Manual

Basic operation

Adjusting the background screen

Setting the opening screen

The image displayed on the opening screen (which is displayed when the power is turned
on) can be changed to your favorite one stored in a CD-R/RW.

Changing the image on the opening screen


Insert a CD-R/RW disc that includes your favorite image.
• It would take approximately 30 seconds to read the image data. While the image
data is being read, do not operate the main unit and the ignition key.

Touch Opening Image Change

Touch the image you want to display on the opening screen.

OK
Touch .
• Be sure to eject the CD-R/RW disc that includes the image data.
The format of disc and image data that can be used on the opening screen are shown in the
table below. If your disc and/or data does not meet the conditions below, the file names may
not be listed nor displayed correctly.
Disc format
File size
File name
File extension
Writing method
Image size
Displayed file
*When storing the image data in a CD-R/RW disc, make a text file named "CSM.txt" (any
content/text is OK) and store it together with the image data.
• If the image size is larger than the condition above, the image cannot be previewed or
imported.
• If the image size is smaller than the condition above, the image will be displayed at the
center of screen.
• Only one image data can be imported at a time.
.

About usable image data

ISO9660 (MODE1)
Smaller than 100 KB
ISO9660 LEVEL 2 (Up to 31 bytes)
.jpg (Non-JPEG2000-compliant)
Single-session only
416 (W) X 240 (H) dots (Max.)
The files in the root directory (top-most directory) only.
CD-R/RW
45