Euphonix EuCon Setup Manual page 22

6. Repeat steps 3 and 5 for each additional Artist control surface in your net-
7. Close the Preferences dialog.
Your Artist device should now be controlling your application. If not:
•
•
•
22
work.
The MIDI ports selected here should match those specified in the Euphonix
Preferences Pane.
Make sure Live is the front-most application (i.e., the one receiving key-
strokes and mouse clicks). The Artist devices control only the front-most ap-
plication.
Check that all steps in Setting Up EuCon for Mackie Control on page 16 and
in this section have been performed correctly, and reboot your Mac.
Make sure the Euphonix MIDI device in Applications->Utilities->Audio MIDI
Setup is blue (active) and not gray (inactive). If inactive, select it, click Re-
move Device, and click Rescan MIDI.
Artist Series
professional control surfaces