Eucon Device Setup - Euphonix EuCon Setup Manual

Artist Series
professional control surfaces
4. Select EuCon from the drop-down list.
The EuCon device is added, the control surface immediately updates, the
faders and knobs display track functions, and the EuCon Device Setup dialog
appears (Figure 4-1).
4.1

EuCon Device Setup

This section discusses the EuCon Device Setup dialog which allows editing track
assignment and transport control parameters. If the EuCon Device setup dialog is
not open: From Cubase choose Devices->Device Setup, then select EuCon from
the Remote Devices folder in the Devices section.
Figure 4-1 EuCon Device Setup
11