Epson PowerLite D6150 Quick Setup Manual

PowerLite D6150/D6155W/D6250
®

Quick Setup

Before using the projector, make sure you read the safety instructions in the
User's Guide on your projector CD.
Connect the projector
Choose from the following connections:
Computer Monitor Port
Connect a computer using the VGA cable that came with the projector.
Connect one end of the cable to the projector's Computer1 or Computer2
port, and the other end to your computer's
a notebook, switch it to external display (see "Troubleshooting"). You can also
connect an audio cable. See the User's Guide on your projector CD for details.
Wired Network
You can connect the projector to your network using an Ethernet
See "Project over a wired network" for instructions.
Wireless Network
You can connect the projector wirelessly over an 802.11b, 802.11g, or 802.11n
wireless network using the optional Epson wireless LAN module. See "Project
wirelessly" on the back of this sheet for instructions. " on the back of this sheet for instructions.
Video Device
Connect up to 5 video devices and use the Source Search button on the
projector or remote control to switch between them. (All cables are optional).
See the User's Guide on your projector CD for details.
*412046400*
*412046400*
monitor port. If you are using
cable.
®
for instructions.
RCA video cable (composite video)
S-Video cable
Audio cable
Component video to VGA cable
Audio cable
HDMI cable
Camera, USB Device, or Epson Document Camera DC-06
Connect a digital camera, USB flash drive, USB storage device, or Epson
document camera DC-06 to the projector's USB TypeA (flat) port.
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector's Slideshow feature. See the User's Guide on your projector
CD for details.
External Monitor and External Speakers
You can also connect an external monitor and external speakers to your
projector to enhance your presentations. See the User's Guide on your projector
CD for details.
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector.
The power light on the projector turns orange.
3
Press the power button on the projector or remote control.
Power button
The power light flashes green, then stays on.
Note: To shut down the projector, press the
unplug it. You don't have to wait for the projector to cool down.
4
The default language of the menu system is English. To select another
language, press the Menu button on the remote control. Select
Extended and press Enter. Select Language and press Enter. Select
your language and press Enter. Press the Menu button to exit the
menu system.
Power light
power button twice, then