Epson Printer Interface Cartridge for the Apple IIc Operation Manual page 86

Tabs
HT
Format:
ASCII code:
Decimal:
Hexadecimal: 09
Control:
Comments:
Advances the print position to the next horizontal tab setting.
ESC D
Format:
ASCII code:
Decimal :
Hexadecimal:
Comments:
This command allows setting of up to 32 horizontal tabs. These are
entered as nl, n2, n3 etc. (in the range
terminator. The tab settings nl, n2, n3 etc. must be entered in
ascending order. If nl = 0, all tabs are cleared. The settings on
power up or after an ESC @ command are every eight characters.
VT
Format:
ASCII code: VT
Decimal:
Hexadecimal:
Control:
Comments:
Advances the paper to the next tab setting in the channel selected by
ESC /. If no channel has been selected, channel 0 is used. If no
vertical tabs have been selected, the paper advances one line.
C-16
H T
9
CTRL I
D
ESC
27 68
44
1B
11
OB
CTRL K
Tab Horizontally
Set Horizontal Tabs
(n1) (n2) .
(n1) (n2) .
(n1) (n2) .
to 255) with ASCII 0 as the
1
. . 0
. . 0
. . 00
Tab Vertically