Eclipse AVN5495 Reference Manual page 6

Esn e5 6.5" wide tft touch-panel display cd/dvd/ms multi-source receiver with hdd navigation
Hide thumbs Also See for AVN5495:
Table of Contents

Advertisement

Read the following prior
to using this device
If the device is exposed to strong vibrations due to rough driving, the device
may not be able to read the data stored on the disc, rendering normal operation
impossible. Reduce the vibration level and normal operation will resume in a
ADVICE
moment.
Condensation may accumulate on the lens that functions to read CDs and
DVDs immediately after turning the heater ON in cold temperatures. Wait about
1 hour for the condensation to evaporate and the device will operate normally.
Contact the store of purchase if normal operation does not resume after several
hours.
If using this device immediately after having purchased it or after having stored
it disconnected from the vehicle battery, the present location may not be
accurately displayed. Wait a moment and the GPS positioning will correct the
displayed position.
This is a precision device and is therefore affected by static electricity, electrical
noise and vibrations which may result in a loss of user data. Please keep a
separate note of the information stored on the unit.
Furthermore, please be aware that the warranty does not cover the following
cases.
Data stored by the user in the hard disc drive is altered/lost as a result of
malfunction, improper use, or fault of the unit, or, as a result of adverse effects
associated with electrical noise.
Data stored by the user in the hard disc drive or map data/base program data in
the hard drive is altered/lost as a result of improper use of the unit by you or a third
party.
Data stored by the user in the hard disc drive is altered/lost during malfunction/
repair.
* Furthermore, by installing or using this device, you signify that you agree to the
above terms.
This unit is designed to be resistant to electrical noise generated by other
electrical devices. However, if a device generating a high level of noise is
operated in the vicinity of the unit, the screen may be distorted or static and
other such problems may be caused. Should this happen, refrain from using
that particular electrical device.
6

Advertisement

Table of Contents
loading

Table of Contents