Route Setting; Setting The Desired Route - Eclipse AVN5495 Reference Manual

Navigation
5

Route setting

Setting the desired route

After deciding on a destination, recommended routes from the present
location to the destination are searched for and displayed on the
screen.
Routes to the destination will be shown on the screen and the required
time and distance to the destination will be displayed. This is called the
"All-route display".
From the all route diagram, you can check the progress of your journey,
select a different route and add stops along the route.
■
About displays
Toll road distance
display
Freeway distance
display
Used road overview
display
Distance display
Remaining distance
display
Required time display
All toll road distances to the destination are displayed.
All freeway distances to the destination are displayed.
Icons for ferry crossings and restricted roads up to the
destination will be active if these are included in the
route.
The distance to the destination is displayed (in case of
multiple stops, distance to the last stop is displayed).
The distance remaining on the indicated route is
displayed.
In case of multiple stops, the required time and distance
to each stop are displayed every time this switch is
touched.
The required time to the destination is displayed.
59
Continue to the next page