Table of Contents
Advertisement
8.
Turn on the scanner by pressing the end of the power
switch. The green Power light on the top right side of the
scanner comes on. The Ready light also flashes while the
scanner warms up.
9.
Turn on your monitor and all your other peripheral devices.
Then turn on the computer. (Always turn on the scanner
before the computer.)
The scanner's Ready light goes out when you turn on the
computer and then comes on again once the computer
boots.
Installing the Xerox Desktop Document
Management Suite
Follow these steps to install the Desktop Document
Management Suite (or DDMS) software on your computer's
hard disk drive:
1.
Start Windows, if necessary.
2.
Insert the Xerox DDMS Disk 1 into a diskette drive.
3.
From the Program Manager, open the File menu and choose
Run. You see the Run dialog box.
Type A: SETUP (or B: SETUP if you inserted the diskette in
4.
drive B) in the Command Line Box and choose OK.
5.
After a few moments, you see the installation program
dialog box; choose Continue.
8 Getting Started
Advertisement
Table of Contents
