Changing The Sewing Foot And The Fabric Clamps - Duerkopp Adler 910 Installation Instructions Manual

7.

Changing the sewing foot and the fabric clamps

2
20
1
The sewing unit 910 is delivered with two sewing feet.
Caution: Risk of injury !
Switch the main switch off.
Change the sewing equipment only with the main switch switched off.
Changing the sewing foot
–
Unscrew screw 2.
–
Change sewing foot 1.
–
Insert screw 2 and tighten.
Disassembling the upper fabric clamp
–
Unscrew screws 4.
–
Remove fabric clamp 3.
Disassembling the lower fabric clamp
–
Unscrew screws 6.
–
Remove clamping plate 5.
The assembly is done in reverse order.
6 5 4 3