Reloading The Factory Programs; Troubleshooting - ToneWorks Pandora PX4 Owner's Manual

3.Reloading the factory programs

While holding down the RHYTHM button and the
L button, turn on the power. The LCD will ask
"RELOAD?"
If you press the ENTER/REC button, the facto-
ry-set programs will be re-loaded into the user
program area. The display will indicate "RE-
LOAD", "VERIFY", "COMPLT" for a short time,
and then the power-on screen will appear.
Never turn off the power during the reload op-
eration.
If you decide not to reload the factory programs,
press the EXIT button. The factory programs
will not be reloaded; the normal power-on screen
will appear, and the PX4 will be in Play mode.
Be aware that if you reload the factory-set pro-
grams, the user programs and any settings that
are remembered when the power is turned off
(master level, infrared transmitter, etc.) will all
be rewritten.

Troubleshooting

If the PX4 does not operate as you expect, please
check the following points first. If this does not
resolve the problem, contact your dealer.
1.Power does not turn on.
• Are batteries installed? Alternatively, is the
correct AC adapter connected to an AC out-
let?
2.No sound
• Are your guitar, amp and headphones con-
nected to the correct jacks?
• Is your amp turned on and set correctly?
• Are any cables broken?
• Is the master level of the PX4 set to "0" or to
a low level?
• The VOLUME control knob may have been
turned down.
• Is the PX4 muted?
Be aware that if all effects are off, the chain
display will disappear, and it will not be pos-
sible to distinguish Bypass or Mute from the
LCD display.
27