Amp (Amp Modeling) - ToneWorks Pandora PX4 Owner's Manual

AMP (Amp Modeling)

When using Amp Modeling, the control knobs (GAIN, TREBLE, BASS, VOLUME) and Value dial will
both be active. The VOLUME knob can still be used even when Amp Modeling is "OFF."
If SYNTH is selected as the type, the control knobs will control oscillator selection, VCF setting, direct
level, and synth level respectively.
Types marked by an asterisk* can also be selected by the amp modeling selector.
In order to take full advantage of the characteristics of Amp Modeling, we recommend that you use it
in conjunction with Cabinet Modeling when listening through headphones or when recording from
line output.
(π/† button or Amp modeling selecter)
BTQ CLN* Clean channel of a high-end 100 W hand made amp.
(recommended CAB: 4x12CLS, 4x12VIN, 4x12MDN)
BLK2X12* 2x12 combo amp indispensable for country or blues players.
(recommended CAB: 2x12BLK)
TWD1X12* Combo amp covered in tweed cloth.
(recommended CAB: 1x12TWD)
TWD4X10* 4x10 combo amp designed for bass guitar.
(recommended CAB: 4x10TWD)
AC15* VOX AC15 manufactured in 1962.
(recommended CAB: 1x12VOX)
AC30TB* Brilliant channel of a VOX AC30TB.
(recommended CAB: 2x12VOX)
TYPE VALUE
(Value Dial & Control Knobs)
GAIN -- amount of distortion
TREBLE ----------- high range
BASS ---------------- low range
VOLUME ----- output volume
Value dial ---------- mid range
(0...10.0)
31