Rhythm & Bass Reverb Level; Chain Pattern Settings - ToneWorks Pandora PX4 Owner's Manual

If "METRONM" (metronome) is selected as the
rhythm pattern, there will be no bass notes, and
this screen will not appear.
When using Chain Patterns, the Bass Key set-
ting will be ignored.
4. Rhythm & Bass Reverb Level
Use the Value dial to set the amount of Rhythm &
Bass sound that will be sent to reverb modeling.
The same effect as for the guitar is used for re-
verb. This parameter has no effect if you have
selected a program that does not use reverb
modeling, or if the reverb effect level is "0."
18
Reverb level

Chain Pattern settings

These parameters are added only if you select
"CHAIN" as the rhythm pattern. Press the EN-
TER/REC button to access the Chain Parame-
ter Select screen. Use the √/® buttons to se-
lect the location (1...8) for which you want to
change the pattern, and use the Value dial to
select the pattern (p.40) that will be used at that
location. Use the L/M buttons to specify the bass
key of the selected pattern.
Up to 8 patterns can be connected. If you want to
create a chain of 7 or fewer patterns, select "PTN
END" for the last pattern.
Press the ENTER/REC button to exit the Chain
Pattern Select screen.