Effect Parameter; Dyna (Dynamics & Pickup Modeling) - ToneWorks Pandora PX4 Owner's Manual

Effect Parameter

DYNA (Dynamics & Pickup modeling)
COMP This compressor produces consistent levels and sustain.
DYNAEXC This effect dynamically applies an exciter according to your
picking strength. (This is especially effective when you want (0...10.0)
to give more sparkle to clean sounds.)
VOX WAH Models a VOX V847 wah pedal
WAHUP1 Positive-polarity auto-wah that responds sensitively to attacks Adjusts sensitivity.
WAHUP2 Positive-polarity auto-wah that responds smoothly to attacks (0...10.0)
WAHDWN1 Negative-polarity auto-wah that responds sensitively to attacks
WAHDWN2 Negative-polarity auto-wah that responds smoothly to attacks
SLOWATK Smoothes the attack of a guitar to create a violin-like effect.
OCTAVE This generates a pitch one octave lower than the original
sound, and mixes it with the original sound to add a sense
of depth and low end.This effect may not operate correctly
if two or more strings are played simultaneously, or when
low-pitched strings are played.
RING An effect that produces bell-like sounds. (For the cleanest
effect, use the neck pickup, turn down the tone control of
your guitar, and play near the 12th fret.)
TYPE (π/† button) VALUE (Value Dial)
Adjusts sensitivity.(1.0...10.0)
Adjusts sensitivity.
Adjusts location of a pedal (1.0...10.0)
Specify the attack speed
(1.0...10.0)
Adjusts effect level.
(0...10.0)
Specify the frequency
(1.0...10.0)
29