1.2.6 Default Setting Mode 2
Refer to the following flowchart for the default setting mode 2.
1.2.6.1 Setting Items
Setting values available for the default setting mode including factory settings are as shown in the
following table:
Table 1-13. Setting Values Available for Default Setting Mode 2
Items
Page length for front tractor
Page length for rear tractor
Character table
International character set for
Italic table
Rev. A
Figure 1-5. Flowchart for Default setting mode 2
Setting values (BOLD font : factory setting)
3 inch, 3.5 inch, 4 inch, 5.5 inch, 6 inch, 7 inch, 8 inch, 8.5 inch,
11 inch, 70/6 inch, 12 inch, 14 inch, 17 inch
3 inch, 3.5 inch, 4 inch, 5.5 inch, 6 inch, 7 inch, 8 inch, 8.5 inch,
11 inch, 70/6 inch, 12 inch, 14 inch, 17 inch
Standard version:
Italic, PC437, PC850, PC860, PC863, PC865, PC861, BRASCII,
Abicomp, Roman 8, ISO Latin 1
NLSP version:
Italic, PC437, PC850, PC437 Greek, PC 853, PC855, PC852,
PC857, PC866, PC869, MAZOWIA, Code MJK, ISO 8859-7,
ISO Latin 1T, Bulgaria, PC774, Estonia, ISO 8859-2, PC866
LAT.
Italic U.S.A., Italic France, Italic Germany, Italic U.K., Italic
Denmark 1, Italic Sweden, Italic Italy, Italic Spain 1
FX-880 Service Manual
Chapter 1 Product Description
1-11