4.2.1 Printhead Removal
1.
Remove the top cover.
2.
Remove 2 CBS (M3
3.
Disconnect the head FFC from the printhead and remove it.
WARNING
Before disassembling or assembling the printhead, disconnect the
Be careful with the printer when you handle it, as it may be very hot
After replace the printhead, perform the platen gap adjustment. (Refer
to Chapter 5.)
Rev. A
8) screws attaching the printhead to the carriage assembly.
power supply cable from the AC power socket. Failure to do cause
personal injury.
just after printing.
Figure 4-2. Printhead Removal
Chapter 4 DISASSEMBLY AND ASSEMBLY
FX-880 Service Manual
4-5