Diagnostic Programs; Lenovo Solution Center - Lenovo ThinkStation E30 User Manual

Symptom
The operating system does not
start.
The computer beeps multiple
times before the operating
system starts.

Diagnostic programs

Diagnostic programs are used to test hardware components of your computer. Diagnostic programs can
also report operating-system-controlled settings that interfere with the correct operation of your computer.
You can use the preinstalled diagnostic program to diagnose computer problems, if your computer is
running the Windows operating system.
Notes:
1. Depending on the date when your computer was manufactured, your computer is preinstalled with
either the Lenovo Solution Center program or the Lenovo ThinkVantage Toolbox program for diagnostic
purposes. For more information about the Lenovo ThinkVantage Toolbox program, see "Lenovo
ThinkVantage Toolbox" on page 71. For more information about the Lenovo Solution Center program,
see "Lenovo Solution Center" on page 70.
2. You can also download the PC-Doctor for DOS diagnostic program from http://support.lenovo.com.
See "PC-Doctor for DOS" on page 71 for detailed information.
3. If you are unable to isolate and repair the problem yourself after running the programs, save and print
the log files created by the programs. You will need the log files when you speak to a Lenovo technical
support representative.

Lenovo Solution Center

The Lenovo Solution Center program enables you to troubleshoot and resolve computer problems. It
combines diagnostic tests, system information collection, security status, and support information, along
with hints and tips for maximum system performance.
Notes:
• The Lenovo Solution Center program is available only on models preinstalled with the Windows 7
operating system. If your Windows 7 model is not preinstalled with the program, you can download it
from http://www.lenovo.com/diagnose.
• If you are using the Windows Vista or Windows XP operating system, go to
http://www.lenovo.com/diagnose for the latest information on diagnostics for your
computer.
To run the Lenovo Solution Center program on the Windows 7 operating system, click Start ➙ All Programs
➙ Lenovo ThinkVantage Tools ➙ System Health and Diagnostics. Follow the instructions on the screen.
For additional information, refer to the Lenovo Solution Center help system.
Note: If you are unable to isolate and repair the problem yourself after running the program, save and print
the log files created by the program. You will need the log files when you speak to a Lenovo technical
support representative.
70
ThinkStation User Guide
Verify that:
• The startup sequence includes the device where the operating system resides.
Usually, the operating system is on the hard disk drive. For more information,
see "Selecting a startup device" on page 61.
Verify that no keys are stuck.
Action