Lenovo ThinkStation E30 User Manual page 53

5. Press the blue release button to release the hard disk drive cage from the chassis.
Figure 29. Removing the secondary hard disk drive
6. Remove the hard disk drive cage from the chassis by simply sliding it outward.
7. Pull on the blue handle to release and remove the hard disk drive from the hard disk drive cage.
8. Flex the sides of the blue bracket to remove the hard disk drive from the bracket.
9. To install a new hard disk drive into the blue bracket, flex the bracket and align pin
and pin 4 on the bracket with the corresponding holes in the hard disk drive. Do not touch the circuit
board 5 on the bottom of the hard disk drive.
Figure 30. Installing the hard disk drive into the bracket
10. Slide the new hard disk drive into the hard disk drive cage until it snaps into position.
1 , pin
.
Chapter 4 Installing or replacing hardware
2 , pin 3 ,
43