Epson Equity III Product Support Bulletin page 91

E P S O N
EPSON
AMERICA INC.
SERVICE DEPARTMENT
PRODUCT
DATE:
6/8/87
SUBJECT: MS-DOS 3.2 SELECT COMMAND - MANUAL ERROR
A documentation
3.2 manual which is supplied with the Equity It and III+, there is
an error in the
also occurs in the HELP utility data file.
In the respective sections
the syntax is given as:
SELECT C: 001 US
Also, in the HELP utility, the format is given as:
SELECT [DOS
source d:] [target d:] xxx yy
with the
parameters. This turns out
destination drives are required parameters.
-
there
method for logical formatting:
FORMAT C: /S/V
or use the correct
SELECT A: C: 001
SUPPORT
error has
documentation for the
square brackets
are two solutions. One is to use the "traditional"
SELECT
syntax:
US
been identified
SELECT
on using the Equity hard disk drive,
indicating
not to
be the
BULLETIN
NUMBER:
in the MS-DOS version
command. This error
optional
command
case; both source and
Page 1 of 1
S-0011
line