Epson Equity III Product Support Bulletin page 90

E P S O N
EPSON AMERICA INC.
SERVICE DEPARTMENT
PRODUCT
7/28/87
DATE:
EQUITY III+ ROM BIOS NEW RELEASE
SUBJECT:
The purpose
regarding the new Equity III+ ROM BIOS and how to obtain it.
The new ROM BIOS
encountered
with the Dedicated
III+ systems
(Ver. 1.02), failed to boot and displayed the following message:
ABEND
REBOOT
The new ROM BIOS upgrade
installable,
installation
Department on an as needed basis.
DEALERS & AUTHORIZED
All dealers
an as-needed
(800) number and dealer access code.
of the Equity III+ ROM BIOS upgrade program
be pre-shipped
Note: Since this is a user installable upgrade there
dealer
END-USERS:
End-users
Department
the ROM
Service Representative
number of the Equity III+.
Note: The old ROMs must be returned to Epson America, Inc.
within 30 days or an invoice will be sent for the full list
price of the upgrade ROMs.
SUPPORT
of this bulletin
was released
when trying to use the Equity III+ as the file server
version
(below S/N
INVALID OPCODE
TO RESTART
kit
consists of a
instructions, can
SERVICE
and ASC's
basis through
to the requested
reimbursement program
should be referred
using our toll-free
BIOS upgrade.
with
is to provide
primarily
of
Novell Netware
036981), with the
INTERRUPT
(P/N D27128B-150),
set of two 27128 ROMs (Ver. 1.50) and
be
ordered
CENTERS:
can order the upgrade free of charge on
the
Special
Indicate that this is part
address.
for this
to Epson's
number
They will need
their name,
BULLETIN
NUMBER:
S-0013A
you with information
correct
to a
286 v2.0a.
earlier
which
from
Epson's
Order Desk
using
and the ROMs
will be no
upgrade.
Consumer Information
(800) 421-5426
to provide the
address
and the serial
Page 1 of 1
problem
Equity
ROM BIOS
is user
Service
the
will
to order
Customer