Epson Equity III Product Support Bulletin page 51

I format my 40MB hard drive so that I can get full
Q18. How do
use of the 40 megabytes?
Since MS-DOS 3.2
A.
program
megabytes
Dimensions'
drives to
Q19. Are the ANTA and ANT-RM boards for the EQ III+(10MHz)
EQ III+
No.
A. The
operate at 12MHz. The
in a 12MHz systems.
Q20. What RAM
the EQ III+?
The RAM chips used in expansion boards should have an access
A.
time of 120ns or faster.
Q21. What are the wait states for the EQ III+?
The default
A.
is 4, adjustable to 3, 2, or 1 by setting the jumpers on the
ANTA board. The system memory, (RAM and ROM) defaults to two
wait states adjustable to one.
OPTIONS
Q22. What extended memory boards are compatible with the EQ III+?
Epson recommends
A.
only
must be used
that. are
"SpeedStor"
provide this
(12MHz) interchangeable?
EQIII+(12MHz)
10MHz
chips should be used on the expansion boards for
wait state
the following
AST Research
AST Research
Intel Corp.
Intel Corp.
STB Systems
Systems
STB
Profit Systems
supports 32MB,
full
to
get
available. Epson
disk manager
capability.
requires higher
boards will
for the EQ III+ 10MHz/12MHz I/O bus
memory
Advantage
Rampage
Aboveboard
Aboveboard
Grande
Rio
Elite 16
4 of 6
a disk
use of the 40
includes
with the 40MB hard
speed components
not operate
expansion boards:
Premium
286
286 p/s
Byte
Grande
manager
Storage
and
to
reliably