Epson Equity III Product Support Bulletin page 29

NUMBER: S-0061
Bridging: The
cards at the same time. Whenever two or more driver configurations
are listed together in this report,
testing and that the drivers and cards are functioning at the same
time.
ASYNC Communications
to communicate between the file server and a remote workstation
using an asynchronous
controlling the
Extended Hardware
and Novell SCSI disk subsystem interface boards (DIB) are used
in the file server to connect Novell disk subsystems to the file
server. Note that
as they are only compatible with the 16-bit AT-type bus.
Network printing is tested by sending a print job from a
workstation to a printer connected to the file server.
Workstation Testing:
driver is available, the system is tested as a workstation,
such as with the Novell Network Interface Cards (NICs).
Novell Supplied
The Equity has been tested using the following software and
I+
hardware:
Software
Advanced NetWare 86 2.0a
The Equity
II+
software and hardware:
Software
Advanced NetWare
Advanced NetWare
Non-dedicated Adv.
SFT NetWare 286
SFT NetWare 286
SFT NetWare 286
The following pages present a summary of the Novell test reports.
file server is
Testing: Modems and telephone lines are used
operating
serial ports.
Testing: Novell
the DCBs are
In situations where only a workstation
Software and
and have been
III+
86 2.0a
286 2.0a
NetWare 286
Level
I 2.0a
Level
II 2.0a
Level
II 2.1
configured with
it is an indication of bridge
system driver
Disk Coprocessor
only tested
Hardware
Hardware
Novell-supported
tested using
Hardware
Novell-supported
Novell SCSI DIB
2.0a
Novell DCB
PAGE:
different interface
and shell driver
boards (DCB)
on the and
II+
NICs
the following
NICs
2 of 13
III+,