Epson Equity III Product Support Bulletin page 49

Can the EQ III+ enhanced keyboard be used with the EQ III?
Q5.
the
A.
No,
keyboard.
Datadesk
keyboard and is switch selectable to operate with
AT
and type
I lost the keys to my EQ III+, how can I get a replacement?
Q6.
A. Replacement
assembly
Why has
Q7.
A. Epson has standardized on the CDC half-height 40MB hard
drive which has the same features in a half-height
This drive can he used in the EQ I+, II+, and III+ systems.
Can a 1.44MB, 3.5" floppy disk drive be used in the EQ III+?
Q8.
No.
A. The EQ III+ does not
either the ROM BIOS or floppy disk controller level.
After installing
Q9.
correctly, I continuously get a "162" set up error
system
when the computer boots up.
When setting up pour system for use with an EGA monitor, you
A.
must set the DISPLAY
Options".
Q10. What is the dot pitch of the Epson 4095
A. The dot pitch is .31mm.
Q11. What hard drive controllers can be used in an EQ III+?
The following
A.
EQ III+ :
EQ III ROM
We recommend
101. This keyboard has its own BIOS support in the
computers.
keys are
replaced. Refer
must be
Epson stopped
an EGA monitor/EGA card and setting up the
parameters
HDD controllers
Western
IBM
DTC
BIOS does
third party
a
not. available.
to
supplying Miniscribe
support a
in
have been certified in the
Digital
2
of 6
not support the
keyboard
The complete
TIB# EQIII+-002
40MB drives?
1.44MB floppy
"Special
SETUP to
EGA monitor?
WD1002-WX1
WD1003-WAH
WD1003-WA2
WD1002-27X (RLL)
Enhanced AT
5160-CRH (RLL)
enhanced
like the
IBM PC/XT
lock
frame.
drive at