Your garage door opener is packaged in two cartons which contain all parts illustrated below. If anything is
missing, carefully check the packing material. Parts may be "stuck" in the foam. Hardware for assembly and
installation is also listed below.
Door Control Button
with (2) 6ABx1-1/2" screws
Light Lens (1)
2-Conductor Bell Wire
Chain
Pulley Bracket
Safety Sensor
INSTALLATION HARDWARE
Clevis Pin 5/16"x2-3/4" (1)
Lock Washer 5/16" (6)
Insulated Staples (10)
Carton Inventory
SECURITY
Single-Function Remote Control
White & White/Red
Trolley
(2) Safety Reversing Sensors
(1 Sending Eye and 1 Receiving Eye)
2-Conductor White & White/Black Bell Wire
Remote Control
Visor Clip
Chain
Door Bracket
One-Piece
T-rail
Header Bracket
with
attached
Dry Wall Anchors (2)
Rope
Rail Grease
Carriage Bolt 1/4"-20x1/2" (2)
Wing Nut (2)
Insulated Staples (20)
5
Sprocket Cover
Styrofoam
Curved Door
Arm Section
Safety Labels
and
Literature
Straight Door
Arm Section