Table of Contents
Advertisement
XVII.Remote Control Operation
Remote Control Operation
1. Remote Control Operation
◆
The remote control applies lithium battery(CR2025).
◆
The service life of battery is one year in normal use.When the remote control
cannot work,please replace the battery.
◆
Do not place the remote control in high temperature environment and avoiding
direct solar radiation for its normal work.
◆
Make sure that the negative and positive terminais of the battery are properly
connected.
◆
Do not pick up the battery with any metal plier to prevent ftom short circuit.
2. Remove battery
Remove the battery from the back of the remote control as shown below:
3. Insert battery
Place the anode(+) and cathode(-) of lithium battery (CR2025) properly as shown
below:
Press
Pull
27
Bluetooth
◆ The unit has bluetooth function.
Ipod Function
◆ This unit supports external iPod player.
III. Basic Functional Operation
Startup/Shutdown
●
Press the [PWR SRC] key on the panel or press
[
] on the remote controller to start the device.
●
Hold down the [PWRSRC] key on the panel or press
[
] on the remote
controller to shut down the device.
Play Source Selection
Press repeatedly the SRC key on the panel or the SRC key on the remote
controller to play according to the order of "Radio →DVD→AUX→CDC→TV→GPS".
Attention:
◆
If the device is not connected to a changer, you cannot switch to the disc play
state.
◆
In the switch process, the abbreviated name of the source will be displayed on the
TFT display screen.
◆
Source selection can also be conducted by touching the screen.
4
Advertisement
Table of Contents
