Gerber Sabre Owner's Manual page 22

14 Sabre Owner's Guide
Some menus have only one letter to make a selection. For example, you can select English or
metric measurements in the Units menu:
Repeatedly pressing the A key toggles the choice between English and metric. When the display
shows what you want, press ENTER to confirm the choice. Press EXIT to go to the previous
menu. Continue to press EXIT until the Main Menu appears. Toggle between MAIN MENU 1
and MAIN MENU 2 by repeatedly pressing one of the arrow keys.
The following table provides specific information about the control pad.
Job control keys
START
PAUSE
RESET
Menu selection keys
A
B
C
Menu control keys
EXIT
PAGE UP
PAGE DOWN
ENTER
Function keys
TBL Z INT (table init)
MATL Z INT (material
init)
ADJ DEPTH
Z UP
RPM
FEED (feed rate)
HOME
RET 0,0
ATC
DFLT (default
configuration)
SHIFT
UNITS
ENGLISH
A: CHANGE
Starts or resumes a routing job.
Temporarily stops router actions; the stopped job may be restarted.
Pause may not take effect immediately.
Stops the job immediately if the router is running, and terminates the
job.
Selects menu choice A.
Selects menu choice B.
Selects menu choice C.
Returns to the previous menu without recording changes to the
current menu.
Displays the previous menu.
Displays the next menu.
Records the menu selection made.
Allows you to initialize from the table surface for through cutting.
Allows you to initialize from the material surface for non-through
cutting.
Temporarily adjust the initialization depth of the current tool.
Raises the tool to its maximum height. (0,0)
Sets spindle speed (High Frequency Spindle Option only).
Overrides the X,Y feed rate set in ART Path.
Returns to or changes the job home position.
Moves the tool to the table orientation point (lower left).
Opens the Automatic Tool Changer menu.
Returns to the factory default settings.
Press SHIFT and EXIT during manual routing to turn off the motor
and raise the tool.