6.11 Setting the sewing feet in the high position
1
6.12 Sewing-foot pressure
–
Swivel lever 1 downwards.
Set the sewing feet in the high position.
–
Swivel lever 1 upwards.
The sewing feet are released.
or
–
The sewing feet are raised pneumatically or with the knee lever.
The lever 1 swivels back to its starting position.
The knob 2 is used to set the required sewing-foot pressure.
CAUTION !
The sewing material should not "swim".
Do not set more pressure than necessary.
–
Raising the sewing-foot pressure
–
Lowering the sewing-foot pressure = Turn the dial 2
1
2
= Turn the dial 2 clockwise.
counter-clockwise.
GB
19