3
CONNECTING ENERGY SMART APPLIANCE
REMOVE LABEL OVER INTERCONNECT CABLE CONNECTOR ON ACCESS COVER
1
CONNECT APPLIANCE TO ACM
2
2.1 Locate interconnect cable.
This accessory is part of ACM
kit.
2.2 Plug interconnect cable into
connector on access cover as
shown.
2.3 Plug opposite end of
interconnect cable into ACM.
2.4 Refer to ACM kit instructions
to connect ACM to Nucleus
energy manager or Smart Meter
3
PLACE ACM
NOTE: The ACM can be placed on top, back, or side of refrigerator. ACM can also be
See ACM manual for further ACM installation details.
Installation Instructions
REMOVE WHEN
CONNECTING TO ACM
LABEL
TM
15