Table of Contents
Advertisement
[FM AM] button
[AUDIO CONTROL] button
Listening to the tuner
1
Press the [FM AM] button.
This will turn the tuner on.
Press the [FM AM] button to switch to the desired FM or
2
AM bands.
Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in
order each time the button is pressed.
Turn the [SEL] button to the left or right to tune to a
3
station.
Turn to the right: Turnes to higher frequencies.
Turn to the left:
Press the [SEEK /FAST ] button to start the automatic
4
station search.
[SEEK
[FAST
If stations have been stored in memory, pressing a button
from [1] to [6] will directly select a station. (Refer to the section
ATTENTION
"Manually setting stations into memory" on page 34)
Adjusting audio volume
1
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Increases the volume.
Turn to the left:
Do not adjust the volume or other controls while driving the
vehicle. Do so only while parked in a safe location.
Warning
Buttons [1] to [6]
Turnes to lower frequencies.
] button: Starts searching toward higher frequencies.
] button: Starts searching toward lower frequencies.
Decreases the volume.
23
Basic operation
[SEEK
] button
[SEL]
button
[FAST
] button
Advertisement
Table of Contents
