Installing The Solid State Drive - Lenovo ThinkCentre M82 Hardware Maintenance Manual

Hardware maintenance manual (hmm) (may 2012) - thinkcentre m82, m92, m92p
Hide thumbs Also See for ThinkCentre M82:
Table of Contents

Advertisement

4. Note the orientation of the socket cover, and install one side of the socket cover into the microprocessor
socket.
Figure 45. Installing one side of the socket cover into the microprocessor socket
Note: Your microprocessor socket and cover might look slightly different from the illustration.
5. Carefully press the other side of the socket cover downward until the socket cover snaps into position.
6. Carefully check the four corners of the socket cover to ensure that the cover is secured in the
microprocessor socket.
7. Follow any additional instructions included with the replacement part you received.

Installing the solid state drive

Attention: Do not open your computer or attempt any repair before reading and understanding the "Important
safety information" on page 1.
This section provides instructions on how to install the 2.5-inch solid state drive.
To install the solid state drive, do the following:
.
Chapter 9
Replacing FRUs (machine types: 2697, 2698, 2742, 2750, 2935, 2943, 2960, 2967, 2986, 2992, 2994, 2999, 3182,
3184, 3186, 3190, 3201, 3204, 3208, 3212, 3217, 3220, 3226, 3228, 3302, 3391, and 3392)
117

Advertisement

Table of Contents
loading

Table of Contents