Lenovo ThinkCentre M82 Hardware Maintenance Manual page 169

7. Install the screw to secure the card reader bracket to the chassis.
Figure 99. Installing the screw that secures the card reader
8. Connect the card reader cable to one of the USB connectors on the system board. See "Locating
parts on the system board" on page 83.
9. Pivot the optical drive bay downward until it snaps into position.
10. Reinstall the front bezel. See "Removing and reinstalling the front bezel" on page 154.
Note: You might have to remove the card reader cover
cover, pivot the two retaining clips
disengage the card reader cover from the front bezel.
Figure 100. Removing the card reader cover
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 210.
.
Chapter 10 Replacing FRUs (machine types: 2756, 2800, 2929, 2932, 2934, 2941, 2945, 2961, 2982, 2988, 2993, 2996, 3181,
1 that secure the card reader cover outwards and then completely
3183, 3185, 3187, 3198, 3202, 3207, 3209, 3214, 3218, 3224, 3227, 3306, 3393, and 3395)
2 from the front bezel. To remove the card read
163